|Manufacturers and suppliers of gas purification equipment, gas handling equipment for laboratory use, air purification equipment, pure gas generators (carry gas purifiers, moisture traps, oxygen traps, hydrocarbons traps, inert gas purification furnaces, argon, helium, neon, krypton, xenon purifiers, hydrogen generators, pure nitrogen generators, pure air generators, zero air generators, laboratory oilless compressors, gas flow meters, flow, pressure controllers, pressure regulators for pure gases, gas manifolds, fittings, cylinders).||Производители и поставщики лабораторного оборудования для очистки газов, получения чистых газов, газораспределения (фильтры для осушки газов, очистки газов от примесей, трубчатые печи для очистки инертных газов от примесей, генераторы водорода, генераторы чистого азота, оборудование для очистки воздуха от примесей, лабораторные компрессоры, расходомеры для газов, редукторы, регуляторы расхода для чистых газов, фитинги).|
|International companies index.||Международный указатель компаний.|
|Aalborg Instruments & Controls Inc.|
|Aalborg Instruments and Controls is a manufacturer of liquid flow meters, gas flow meters, flow controllers, needle valves, metering valves, solenoid valves.|
|Air Dimensions Inc. (ADI)|
|Air Dimensions, Inc. is a manufacturer of diaphragm pumps, sampling pumps for corrosive gases, vacuum pumps and compressors for air, gas and vapors.|
|Airgas is a manufacturer of high purity specialty gases, research grade gases, gas calibration standards, EPA Protocol standards, CEM systems calibration standards (emission gases), GC standards and carrier gases, gas mixtures, high purity pressure regulators, gas handling equipment, gas panels, gas manifolds.|
|Air Liquide is a manufacturer of pure gases, specialty gases for analytical and scientific equipment, custom gas mixtures, calibration standards for gas analyzers, laboratory pure gas generators (hydrogen and nitrogen generators, pure air generators), and equipment for the handling of pure gases and mixtures. Air Liquide manufactures industrial gas generators: on-site hydrogen generators, nitrogen generators, oxygen generators.|
|Air Products and Chemicals Inc.|
|Air Products and Chemicals, Inc is a manufacturer of pure gases, ultra high purity gases, calibration gas mixtures, gas handling equipment (cylinder regulators, line regulators, manifolds, gauges, valves), onsite gas generation equipment (industrial gas generators). Air Products and Chemicals manufactures and supplies ultra high purity gases (zero gases) and calibration gas mixtures for chemical analysis (gas chromatography, GC-MS, LC-MS, ICP-AES, ICP-MS). Air Products and Chemicals manufactures calibration gases and mixtures for environmental analysis, air monitoring, stack emission monitoring, automotive emissions testing (pure gases and mixtures containing containing nitric oxides, NOx, sulfur dioxide, SO2, hydrocarbons, aromatic compounds, CO, CO2, acid gases, such as HCl, HF). Air Products and Chemicals manufactures industrial gas generators (onsite oxigen, nitrogen, hydrogen generators).|
|Alicat Scientific is a manufacturer of digital flow meters (liquid flow meters, gas flow meters), flow controllers, vacuum / pressure gauges, pressure controllers.|
|BIOS International Corporation.|
|BIOS International Corporation is a manufacturer of gas flow measurement instrumentation (gas flow meters, mass flow devices, laboratory instruments for the calibration of mass flow devices, gas flow calibration systems). BIOS International Corporation manufactures laboratory and portable instruments for the calibration of flow measurement devices, air sampler calibrations (calibration of personal sampling pumps).|
|E.F. Britten & Co, Inc.|
|E. F. Britten & Co is a manufacturer and supplier of low-pressure cylinders for the specialty gas industry, sampling cylinders, and needle valves. Refillable and disposable low pressure steel cylinders with volume from milliliters to liters and working pressures to 600 PSI. Cylinders also available with straight or angled needle valves. E. F. Britten & Co manufactures single end / double end sampling cylinders (gas samplers).|
|Chromatec (Yoshkar-Ola, Russian Federation) is a manufacturer of gas chromatography instrumentation. Chromatec manufactures lab and portable GC systems, GC/MS system, GC inlets, thermodesorbers, pyrolyzer, headspace sampler, accessory equipment for gas chromatography (samplers, hydrogen generator, air compressor, gas purifiers). Chromatec offers data handling system for chromatography.|
|Chromatograpy Research Supplies, Inc. (CRS)|
|Chromatograpy Research Supplies, Inc (CRS) is a specialized supplier of consumables and other products for gas and liquid chromatography. Company supplies packed and capillary columns, gas purifiers, gas purification system, ferrules, septa, vials and accessories, injection port liners, and chromatography maintenance accessories. CRS manufactures a wide variety of gas purifiers for use with GC and GC/MS carrier gases- typical contaminants removed are water, oxygen and hydrocarbons, from inert gases such as helium and nitrogen. The specialty purifiers such as the Carbon Dioxide Trap.|
|Chromatec (Omsk, Russia) is a supplier of GC instruments, GC capillary columns, HPLC instruments, HPLC columns, accessories and consumables for chromatography. The company supplies a broad range of capillary columns for gas chromatography and GC/MS (WCOT columns, PLOT columns, chiral columns for gas chromatography). Chromatec supplies gas handling equipment, flow meters, manifolds, gas purifiers, pure gas generators (hydrogen generator, nitrogen generator, air generator). Chromatec also supplies water purification equipment, laboratory water purification systems. Dispensers, pipettes, tips.|
|Controls Corporation of America.|
|Controls Corporation of America is a manufacturer of high purity gas pressure regulators, valves and flow meters, maniflex high purity autoswitch, modular manifold systems (gas distribution systems), laser systems. New high purity regulators specifically designed for chromatography and analytical service.|
|domnick hunter limited.|
|domnick hunter group plc is an international group of companies
dedicated to developing and supplying innovative, high quality and cost
effective filtration, purification and separation products. The many group
operations are divided into two business segments: Industrial Operations,
to serve the worldwide compressed air market with a full range of air treatment
products. Process Operations, to specialise in the manufacture and supply
of filters for the clarification, stabilisation and sterilisation of liquids
and gases principally in the pharmaceutical, beverage, food and electronics
industries, and also in laboratories.
domnick hunter limited is a manufacturer of a range of on-site gas generation equipment principally for the production of both nitrogen and hydrogen. The NITROX range of laboratory gas generators allows users to produce ultra high purity nitrogen, hydrogen, zero air and CO2-free air on-site for use in a wide range of laboratory applications. MAXIGAS Nitrogen Generators- domnick hunter MAXIGAS nitrogen generators allow users to produce a continuous supply of nitrogen gas from compressed air. Nitrogen can be produced at purity from 97% to 99.999% to suit the application. Nitrogen generators are specifically designed for LC/MS and ICP-OES applications.
|Dwyer Instruments, Inc.|
|Dwyer Instruments is a manufacturer of the measurement
and control instrumentation for pressure, flow, air velocity, level, temperature,
humidity and combustion testing, such as the Magnehelic pressure gages,
Photohelic switch/gages, Rate Master flowmeters, and Hi-Flow valves.
Dwyer Instruments manufactures: single pressure transmitters (adjustable range pressure transmitters, fixed range pressure transmitters, indicating pressure transmitters, industrial pressure transducer, sanitary pressure transmitters, weatherproof pressure transmitter, differential pressure transmitters and indicating differential pressure transmitter, duct pressure transmitter, rangeable differential pressure transmitter, wet differential pressure transmitters for air, gas, liquid, and vapor), handheld digital manometers, wet handheld digital manometer, portable inclined manometers, u-tube manometers, single pressure switches, differential pressure switches, single pressure gages, differential pressure gages, switch-gages, timers and controllers, flow switches, flow indicators - transmitters, flow sensor, digital mass flow meters, flowmeters and flow totalizers, air velocity transmitters, air velocity meter, handheld digital thermo-anemometer and handheld digital mini-vane thermo-anemometers, flow sensors - pitot tubes, air velocity kit, portable wind meters and vaneometer, wind speed indicator, level indicators and controllers, continuous level transmitters, ultrasonic level transmitters, submersible level transmitters, liquid level transmitter, float type level switches, chamber type level switches, optical level switches, multi-station level switches, sludge - slurry switches, conductivity switch, ultrasonic switch, radio frequency switches, dry bulk switches, proximity sensor, temperature controllers and temperature - process controllers, alarms - timers, temperature switches, temperature indicators, temperature transmitters, temperature sensors and thermometers, valve position indicators, ball valves, control valves, butterfly valves, needle valves, specialty valves, actuators - positioners, i/p pressure transducers, regulators, handheld carbon monoxide monitors, handheld combustion analyzer, combustible leak detector, refrigerant leak detector, combustion test kit and smoke gage kit, data loggers and recorders, signal conditioners, relative humidity - temperature transmitter, handheld digital hygrometers, handheld thermohygrometer, test equipment such as calibrators, psychrometers, accessories.
|Eltochpribor (Zelenograd, Russia) is a manufacturer of process and laboratory gas handling equipment, gas supplying systems, gas system components, GC instrument parts and components. Eltochpribor manufactures mass flow controllers, pressure regulators, valves and fittings, pure gas manifolds. Eltochpribor manufactures GC detectors (TCD, thermal conductivity detectors for GC instruments).|
|Environics, Inc is a manufacturer of the computerized gas flow instrumentation for gas mixing, gas blending, gas dilution, calibration, and gas delivery systems. Manufactures the NIST traceable gas delivery systems, gas calibrators, gas mixing and gas dilution systems. These systems deliver gases with an accuracy of +/- 1% set-point accuracy. ISO 9001 Quality Systems Certification.|
|Fathom Technologies is a manufacturer of gas flow measurement and control instrumentation. Fathom Technologies is a manufacturer and supplier of thermal mass flow transducers, mass flow meters and controllers. Mass flow meters and controllers utilize a thermal sensor technology to measure and control mass flow directly. Meters can be calibrated for a large variety of gases and all calibrations are tracable to NIST standards. All Controllers and Mass Flow Meters of the GR Series are available in a variety of configurations including; on board displays, various fitting sizes and most power supply ranges. The SS Series Mass Flow Meters & Controllers also utilizes many of the same components, with a 316 Stainless Steel flowbody which enables a max pressure of 500 PSI and is acceptable for use with corrosive gases. Features- Integral Valve, Display and Setpoint, Linear Output, Single ended power supply, Delrin or Stainless Flow Body, NIST Traceable Calibration. The new line of products: IC Series specifically design for the OEM.|
|Greyhound Chromatography and Allied Chemicals.|
|Greyhound Chromatography and Allied Chemicals (United Kingdom) is a manufacturer and distributor of chromatography columns, consumables and certified reference standards. The company offers an extensive range of chromatography and life-science products. Greyhound's own range of products includes HPLC columns, GC capillary columns, solid phase extraction columns, certified syringe filters, GC liners, ferrules and septa. Greyhound Chromatography offers the Q-Range, a comprehensive selection of own brand GC capillary columns (over 1000 standard columns available - FSOT columns, metal capillary columns, a full range of PLOT columns), HPLC columns, SPE columns (a complete range of solid phase extraction cartridges) and certified syringe filters (0.20µm and 0.45µm porosities). Greyhound Chromatography also represents all the leading independent manufacturers of chromatography consumables (GC septa, GC liners, syringes, ferrules, HPLC fittings, tubing, vials and caps, gas filters, gas purifiers).|
|Himelektronika (Moscow) is a manufacturer of hydrogen generators, nitrogen generators, pure air generators, gas purifiers, water purification system for labs.|
|Hoke Incorporated is a manufacturer and supplier of valves and fittings, instrumentation components and instrument manifolds, modular substrate sampling system and sampling cylinders. Hoke Incorporated manufactures and supplies chromatography fittings, gyrolok tube fittings, precision instrument pipe fittings, instrumentation quick connects, instrumentation components, instrument manifolds, micron filters, check valves, selector valves, and mini-metering valves, stackable air actuated valves, needle valves, ball valves, metering valves, air and electric actuators, actuated valve packages, µMS3 modular substrate sampling system, sampling cylinders, safety devices, leak detective, Circle Seal Controls products.|
|J.U.M. Engineering GmbH.|
|J.U.M. Engineering GmbH is a manufacturer
of high temperature FID analyzers (heated FID) includes: total hydrocarbon
analyzers, non-methane hydrocarbon analyzers, stack emissions analyzers
based on the FID principle, sample handling and gas conditioning instruments,
aerosol can leak detectors, process oil in water monitors for detection
of diesel oil, jet fuel and oil in water. J.U.M. Engineering GmbH manufactures
a whole range of analyzers including wall mount analyzers, portable "All
In One" analyzer, FID analyzer is especially designed for the measurement
of total hydrocarbons in live hot and wet steam; comes fully equipped to
be connected to the steam source via a heated line and 19" rack mount analyzer;
ideal for low trace hydrocarbon applications and CEM systems with pressurized
sample or existing sample handling.
High Temperature Non-Methane Hydrocarbon FID Analyzer and High Temperature Non-Methane / Non Ethane FID Analyzer. J.U.M. custom fits total hydrocarbon analyzers for nearly every THC application in the industry by using standardized modules from a broad range of more than 15 different basic HFID analyzers. The New Heated Total Hydrocarbon Analyzer with Methane-Only Option- The J.U.M. Engineering Model VE 7-09A Total Hydrocarbon analyzer is a compact, rugged 19" rack mount analysis system using the FID (Flame Ionization Detector) principle.
Oil in Water Monitor FP 605 Series- Model FP 605 reliably detects diesel oil, jet fuel and oil in water. The FP 605 is a continuous, on-line, process or field control monitor which provides oil monitoring in water down to the low ppm range. The FP 605 is used for applications which require oil monitoring in treated and untreated wastewater streams. This could be from industrial wastewater, groundwater, process water, produced water and storm water run-off.
The Model FP 605 is available either with or withouit sample pump as a Stationary Wall Mount unit or as a Stationary 19" Rack Mount unit or as a Portable Field Analyzer.
Also J.U.M. Engineering manufactures: Heated sample handling systems, Flexible heated sample lines, Heated multi-point sample sequencers, Non-Methane Hydrocarbon Cutter module, Zero Air Generator, Portable Heated PreFilter and Rack Mounted Heated PreFilter, Burner Air Supply and Heated Sample Diluter for use with HFID analyzers in applications with hc-concentrations greater than some 10.000 ppm.
|JUN-AIR USA Inc.|
|JUN-AIR USA Inc is a manufacturers of air compressors, includes oil-less air compressors for the laboratories. The entire product range at JUN-AIR is characterized by quietness (down to 35 dB), a modern design and flexibility, complу with the international standard for compressed air quality. A product range comprises compressors up to 3 HP/2 kW in oil-less as well as oil-lubricated versions. JUN-AIR's range of oil-less compressor heads is ideal for use in OEM applications where a quiet and reliable source of oil-less air is of utmost importance. Compressor heads are available in various models from 0.25HP to 1.5HP with displacements ranging from 20 to 176 l/min.|
|Key Instruments manufactures and supplies precision machined
acrylic, molded polycarbonate, glass tube, and electronic flowmeters, optical
flow alarms and controllers, and flow control valves, for medical, industrial,
chemical, and laboratory applications. Key Instruments is a manufacturer
and supplier of acrylic flowmeters, glass tube flowmeters compatible with
most liquids and gases, electronic flowmeters provides flow measurement,
monitoring and control, molded flowmeters, flow indicators with 360° rotor
viewing, flow control valves, controllers, and accessories.
Featured products: Series PV9000 Electronic Gas Flowmeters - The PV-Series Flowmeter accurately measures the flowrate of non-hazardous, inert gases with an accuracy of ±2% of full scale. The standard output for the PV meter is 0.2-2.7 VDC; the meter is also available with an integral or remote digital display, or 4-20 mA current signal. The flowmeters are available with full-scale ranges from 50 CCM to 50 LPM, with 50:1 turndowns. PV9000 Series meters can be installed in any orientation with no effect on the flowrate. All units are supplied with an aluminum body, high-impact polycarbonate case and brass compression fittings. The PV Series flowmeters measure volumetric flowrate, making them ideal for purging applications.
|KNF Neuberger Inc.|
|KNF Neuberger Inc is a manufacturer of the oil free diaphragm
vacuum pumps and compressors (dry laboratory vacuum pumps, vacuum systems
and compressors), OEM diaphragm pumps, precision metering liquid pumps,
OEM liquid pumps. KNF Neuberger Inc specializes in corrosion-resistant
air and gas pumps, and self-priming liquid pumps. A KNF liquid pump can
run dry indefinitely without damage, and can pump gas/liquid slurrys. KNF
precision metering pumps can transfer and meter using one pump. KNF manufactures
a complete line of diaphragm pumps and compressors, includes dry laboratory
vacuum pumps. KNF's vacuum pumps are very compact, with many pump models
reaching 1.5 Torr (29.91 in. Hg) end vacuum using only two pumping stages.
KNF's dry, maintenance-free vacuum pump is used in the laboratory as an
oil-free vacuum source for rotary evaporators, gel dryers, distillation
units, filtration devices, vacuum ovens, vacuum concentrators, and other
KNF's pumps are a perfect replacement for dirty, high-maintenance rotary vane pumps that require not only maintenance down time to change oil, but also eliminates the problem of the proper disposal of contaminated pump oil. In addition, users of outdated water aspirators will realize economic savings resulting from not using precious drinking water resources nor will they risk EPA violations caused by improper disposal of drain water contaminated with hazardous solvents. Water aspirator vacuum performance also varies with the temperature of the water. Steady, precise vacuum levels can be achieved by using our oil free pumps with a corrosion resistant vacuum controller. The KNF vacuum pump controller features Kalrez, PP and Viton wetted parts and five memory settings for the storage of individual vacuum level and hysteresis set points. All wetted parts are external to the module for easy cleaning. There are no metal parts in the gas stream. KNF has recently introduced a new pump for use with vacuum ovens, our self-drying model which purges accumulated condensate from the pump heads on a timed interval.
On the OEM pump side, KNF miniature pumps are specified worldwide for use in medical devices such as liposuction pumps for aspirators, as sampling pumps for environmental instruments and analytical instruments. KNF heated head sampling pumps are perfect for use with stack gas sampling systems and prevent the condensation of sample gas in the pump head. KNF explosion proof pumps are used throughout industry in sampling systems, process control systems, analyzers and gas transfer, and are available in full Teflon PTFE construction. KNF liquid pumps are a perfect replacement for many peristaltic pump applications, as they use no tubing, are not subject to changes in flow rate due to peristaltic tubing fatigue or tearing, and are available in all PTFE construction with no metal wetted parts. Because KNF pumps are oil-free, they feature contamination free transfer of air or gases and are an excellent replacement for piston pumps.
|Kurt J. Lesker Company.|
|Kurt J. Lesker Company manufactures high vacuum equipment,
ultra high vacuum equipment and thin film deposition systems. Kurt J Lesker
Company is a manufacturer of vacuum systems, vacuum chambers, vacuum fluids,
vacuum pumps, vacuum components, vacuum valves, traps and filters, sputter
sources, sputter targets, evaporation sources, evaporation materials, process
instruments, surface sciences products, pressure measurement instrumentation,
residual gas analyzers, electrical feedthroughs and motion feedthroughs,
sample manipulation equipment, gas liquid management equipment, and system
components. Kurt J Lesker Company manufactures a wide range of vacuum systems,
vacuum chambers, vacuum pumps, vacuum drying ovens and vacuum components.
A variety of vacuum laboratory equipment, small vacuum pumps, glass bell
jar systems and a wide range of other vacuum products. Kurt J Lesker Company
is a manufacturer of gauges for high vacuum (HV) measurements and ultra-high
vacuum (UHV) measurements includes convection gauges, thermocouple gauges,
thermocouple tubes, pirani gauges, diaphragm manometers, capacitance manometers,
vacuum switches, cold cathode gauges, hot filament ion gauges, multiple
gauges, ion gauge tubes. Kurt J Lesker Company manufactures the AccuQuad,
a quadrupole RGA (residual gas analyzers), RGA inlet systems, leak detectors,
and replacement filaments. The AccuQuad quadrupole RGA's provides analog
and histogram mass scans, single gas monitoring and total pressure measurement.
Its smart microprocessor control automatically handles all hardware-dependent
decisions during measurements, eliminating the guesswork from measurement
routines. AccuQuad's built-in RS232 interface and high-level ASCII command
set make it easy to integrate into any existing control program. AccuQuad
provides complete multiplexing capabilities, monitoring up to eight units
from one PC.
Process Instruments: crystal sensors which use the piezo-electric properties of quartz to measure rate of deposition and final film thickness on substrates; and equipment for spectroscopic ellipsometry which uses polarized monochromatic light in multiple wavelengths to investigate bulk solids, thin films, and material roughness. Other process instruments include monitors, controllers, and recorders.
Sample manipulation equipment: a range of devices for moving samples through a vacuum system without breaking vacuum integrity. These include XYZ manipulators, rotary drives, linear positioners, rotary platforms, linear drives, wobble sticks, mechanical hands, rack and pinion transporters, adjustment mechanisms, and complete transfer systems.
Surface Sciences Products: a full range of components and systems for most spectroscopic, spatial, and ellipsometric surface science techniques used today such as the Phoibos electron energy analyzers, ion energy analyzers, photon sources, electron sources, equipment for diffraction techniques, and the Woollam's variable angle spectroscopic ellipsometer (VASE).
Gas Liquid Management Products: calibrated leaks, mass flow control devices, liquid valves, liquid nitrogen handling equiment, fluid feedthroughs, compress air handling equipment.
|Kurz Instruments, Inc.|
|Kurz Instruments, Inc is the ISO 9001 quality instrument
company manufactures rugged, solid-state thermal convection mass flow meters,
portable air velocity meters and flow control valves for use with air,
industrial gases, flue gases and ultra-high purity process gases for a
wide variety of applications. Kurz Instruments, Inc is a manufacturer of
the thermal mass flow meters include single-point insertion mass flow elements,
in-line mass flow elements, multi-point insertion mass flow elements, portable
air velocity meters and flow control valves. Mass flow elements and flow
control valves are used with the "smart" mass flow computers. Kurz Instruments,
Inc also manufactures isokinetic air sampling systems, and specialty mass
Featured products: 454FT-Fixed Point Mass Flow Transmitter, K-Bar 2000 Multi-Point Insertion Meter, 2440 Series Portable Air Velocity Meters. Kurz products are used in a wide variety of important applications including process control, air pollution, industrial hygiene, electric power plants, semi-conductor fabrication facilities, heating and ventilation, laboratory measurements, combustion air measurements, to name only a few. CE compliance. Explosion-proof FM, CSA and CENELEC safety approvals.
|Matheson Tri-Gas, Inc.|
|Matheson Tri-Gas, Inc (formerly Matheson Gas Products) is a manufacturer and supplier of pure gases, specialty gases, calibration mixtures, laboratory gas generators and gas handling lab equipment, safety and industrial hygiene products.|
|Meta-Chrom (Yoshkar-Ola, Russian Federation) is a manufacturer of automated GC instruments, GC analyzers, process GC system, online NGA system. Meta-Chrom manufactures laboratory GC instruments, GC analyzer systems, process gas chromatograph, natural gas analysis system (NGA system), GC inlets, thermodesorber, pyrolyzer, headspace sampler, data handling system for chromatography. Meta-Chrom manufactures hydrogen generator, nitrogen generator, gas purifiers, air compressor, pure air generator. Meta-Chrom manufactures GC instrument parts, gas handling equipment, digital gas manifold, valves, vacuum gauges and controllers. The company manufactures laboratory reaction systems. Meta-Chrom also manufactures water purification systems.|
|MKS Instruments, Inc.|
|MKS Instruments, Inc is a manufacturer and supplier of
instruments and integrated subsystems that measure, control, power and
monitor critical parameters of semiconductor and other advanced manufacturing
process environments. In addition to semiconductors, MKS (MKS Instruments,
Inc) products are used to manufacture a diverse range of products, such
as optical filters, flat panel displays, magnetic and optical storage media,
medical imaging equipment, architectural glass, solar panels and gas lasers.
MKS Materials Delivery Product Group in Methuen, Massachusetts manufactures Mass-Flo gas phase MFCs and advanced products for the precise delivery of gases, vapor, and liquids.
MKS Pressure Measurement & Control Products in Andover, Massachusetts manufactures Baratron process capacitance manometers and gas delivery pressure transducers; upstream and downstream and self-tuning pressure controllers; butterfly and throttling poppet valves; and calibration systems for vacuum-pressure-gas flow rate instruments.
MKS PICO Products in Methuen, Massachusetts manufactures portable mass-spectrometer-based helium leak detectors.
MKS provides sophisticated measurement technologies to monitor and control manufacturing processes in the semiconductor and opto-electronic industries. Spectra Products in Morgan Hill, California and Crewe, U.K. manufactures an innovative range of in situ process monitoring instruments promoted and sold as fully integrated, application-specific packages. Products include component residual gas analyzers (RGAs), analytical equipment, and process RGAs. MKS On-Line Products in Bloomfield, Connecticut, designs and manufactures an advanced range of gas analysis and wafer metrology products based on FTIR spectrometry, as well as complementary analysis and control software.
MKS HPS Products in Boulder, Colorado manufactures HPS vacuum components and valves in a wide variety of standard sizes and configurations; a broad range of high vacuum gauges, including Pirani, convection Pirani, MicroPirani, hot cathode and cold cathode; and Effluent Management Subsystems for manufacturing productivity enhancement, utilizing HPS vacuum pumping line heaters and traps.
MKS ENI Products in Rochester, New York and Colorado Springs, Colorado, manufactures: RF power supplies for semiconductor and other thin film processing applications and for the magnetic resonance imaging (MRI) market, and DC power supplies for IC, storage media, flat panel display manufacturing, and other coating applications. The ENI product portfolio also includes impedance matching networks and plasma metrology products.
MKS ASTeX Products in Wilmington, Massachusetts manufactures innovative solutions for plasma, power, and reactive gases. ASTeX's product portfolio includes reactive gas generators, ozone generators and ozone liquid delivery subsystems, and microwave and specialty power generators and subsystems.
The Control & Information Technologies group of MKS enables customers to more completely monitor and analyze, and more precisely control, the process chamber environment by integrating critical process components, technologies and data around the process chamber. TeNTA Products process controllers collect data on the process chamber environment by connecting through D.I.P. Products digital process control network products to the instruments, components and subsystems surrounding the chamber. With the addition of IPC Products' connectivity hardware and software, MKS can enable the distribution of that process data in real time across the factory network.
MKS Telvac Engineering in Telford, U.K. manufactures complex vacuum subsystems and offers design and manufacturing outsourcing to OEMs.
Vacuum, pressure and flow measuring instrumentation: mass flow meters and controllers, vacuum gauges, pressure transducers, pressure control, vacuum valves and hardware, mass spectrometers, primary and secondary calibration standards. Orion Partial Pressure Transducer (PPT) Series Residual Gas Analyzer (RGA). The Orion Compact Residual Gas Analyzer (RGA) is designed for the monitoring of pressures less than 10-4 Torr and is typically used for equipment monitoring in loadlock and buffer chambers.
|Mott Corporation is a manufacturer of diverse porous metal products, primarily for use in gas filters, liquid filters, and other filtration and separation applications. Mott Corporation provides porous metal media in a variety of shapes and numerous alloys to meet the requirements of its customers in aerospace, semiconductors, chemicals, medical instrumentation, food and beverage and analytical instrumentation. Products including frits, cups, flow restrictors, inline filters and pump inlet filters for liquid chromatography and gas chromatography instrumentation. Mott Corporation manufactures, engineers, designs, sells and services porous powder metal media and filtration systems, includes porous metal shapes, air bearings and vacuum devices, flow restrictors, gas/liquid contacters and a wide range of filtration products such as precision filter elements, sampling filters, polymer filters, high purity filters and large industrial and instrumentation filters. The Company specializes in the stainless steels and higher corrosion resistant alloys, and avoids the lower melting point materials such as bronze and brass. The principal market for the Company’s products and technology is filtration, but its products have diverse applications in fields such as flow metering, web transport, gas to liquid contacting, venting, wicking, silencing, fluidizing, and many other applications.|
|Nytek Instruments is a supplier of fluorescence spectrometers and microscopes, Raman spectrometers, Raman microscopy systems, thin film measurement instruments (ellipsometers), ICP-OES systems, glow discharge spectrometers, XRF spectrometers, EDXRF microspectrometer, XRF sulfur in-oil analyzer, UV fluorescence sulfur in-oil analyzer, C, H, N, O, S analyzers. Nytek Instruments supplies optical components and modules, instrument parts, accessories and consumables for chromatography and spectroscopy. The company also supplies pure gas generators, oilless compressors, pure air generators.|
|OXY-GON Industries, Inc.|
|OXY-GON Industries, Inc is a manufacturer of vacuum furnaces, inert gas furnaces, and gas purification furnaces. The Model OG-120 is a desktop size purification furnace designed to supply purified inert gases (Argon, Helium, Neon, Xenon and Krypton) for smaller manufacturing production demands or for laboratory needs. It is a self-contained unit which has been designed and manufactured by OXY-GON to purify inert gases to less than 10 parts per million of oxygen or better. In addition to removing oxygen, the OG-120 purifier also removes nitrogen, carbon, and water wapors.|
|Parker Hannifin Corporation - Parker Instrumentation Group.|
|The Parker Hannifin Corporation Instrumentation Group is
a manufacturer of critical flow components for process instrumentation,
ultra high purity, medical and analytical applications. The Parker Hannifin
Corporation Instrumentation Group offer a wide range of products for instrumentation
applications. The Parker Hannifin Corporation Instrumentation Group is
a manufacturer of single and double ferrule compression fittings, specialty
ultra high purity fittings, ball, plug, needle, check, relief and metering
valves, packless bellows and diaphragm valves, teflon fittings, valves,
regulators, and pumps, de-ionized water and nitrogen spray guns, miniature
digital and analog solenoid valves, multi-solenoid manifolds, in-line filters,
Featured products: Pneutronics proportional valves, high and low flow mass flow controllers, solenoid valves, plastic solenoid valves, manifold assemblies; Teflon solenoid valves in 2 way, 3 way and manifold configurations, stainless steel valves for vacuum service, elastomer diaphragm valves and the Series 3 and 4 valves for low cost applications. Veriflo Division valves and regulators including the 3-way Nova Series diaphragm valves and an automatic ChangeOver System which allows uninterrupted gas flow from two sources (banks or cylinders). Parker A-LOK tube fittings and Sanitary Adapters, metering, check, toggle, and miniature ball valves, miniature actuators for miniature actuated ball valves, and filters.
|Peak Scientific Instruments Ltd.|
|Peak Scientific Instruments Ltd is a manufacturer of ultra
high purity (UHP) gas generation systems. Peak Scientific Instruments Ltd
manufactures laboratory gas generators including nitrogen gas generators
(both Membrane Technology & Carbon Molecular Sieve systems), hydrogen
gas generators & zero air gas generators suitable to operate most laboratory
analytical applications such as LC/MS/MS & GC.
Gas Generators- Nitrogen, Hydrogen, Zero Air. Peak Laboratory Nitrogen Generators use highly efficient Carbon Molecular Sieve (CMS) adsorbent to produce a continuous supply of high purity gas (250-3000cc/min). The new HG series hydrogen generators produce 99.99999% pure hydrogen gas from deionized waters with user-adjustable pressure range of 0-150 psi (200-1200cc/min).
Peak Scientific Instruments Ltd manufactures a wide selection of UHP nitrogen, zero air, CO2 removal systems, and air compressors. Peak Zero Air Generators use catalytic oxidation to produce the highest possible purity gas. These systems have a small oil-less air compressor which passes air through a dryer system and a catalyst to ensure an output of dry hydrocarbon free air.
|Perma Pure Inc.|
|Perma Pure LLC is a manufacturer of gas sample conditioning
products such as dryers, humidifiers, filters, coalescers, specialty scrubbers,
and complete sampling systems for use in medical, industrial, and scientific
applications. Proprietary Nafion tubing dryers selectively remove water
from a gas stream without the loss of analytes. Gas sampling systems combine
this dryer technology with filters and temperature controls in heated enclosures
to provide complete gas sample conditioning by removing particulates, high-boiling
liquids, and water vapor without loss of analyte gases such as CO, CO2,
HCl, NOx, O2, SO2 and VOC. Desiccant/Membrane (Portable) Dryers.
The Portable Zero-Air generator produces purified air at rates up to 18 liters per minute. Compounds treated include CO, NOX, SOX, water vapor, hydrocarbons, acid vapors, odors, and bacteria. The unit is totally self-contained in a convenient portable case. Portability is enhanced by its lightweight (27 lbs), built-in carrying handle, and self contained design. The Zero-Air generator requires only a connection to standard 110 or 220 VAC power to operate. The internal compressor supplies up to 18 liters per minute of compressed air. The maximum pressure up to 30 psig.
|Praxair Inc is one of the world largest manufacturers of specialty gases and gas handling equipment. Praxair Inc is a manufacturer and supplier of ultra pure instrument and process gases, benchtop gas generators, cryogens, and liquid products, including high accuracy traceable gaseous and liquid calibration mixtures for environmental, petrochemical, medical, scientific, industrial, laboratory, safety and hygiene, laser, electronics, and bio-tech applications. A full range of high pressure cylinders, smaller transportable containers, is complemented with a full line of regulators, manifolds, delivery systems and safety products. Praxair Inc offers a comprehensive, high-quality product line of certified-zero and pure gases and over fifty packaging options.|
|Pressure Products Industries, Inc.|
|Pressure Products Industries, Inc is a manufacturer of
diaphragm compressors, fuel cell refuelling compressors, laboratory agitated
reactors, magnetic mixers, supercritical fluid systems, custom reactors,
pressure vessels, and other process equipment. Pressure Products Industries,
Inc (PPI) is a supplier of fully integrated standard and custom systems
for supercritical fluid extraction. Since 1954, Pressure Products Industries,
Inc has been serving the chemical, petrochemical, industrial gas, pharmaceutical,
and related industries with expertly engineered equipment for gases and
liquids under pressure. Company's diaphragm compressor, stirred reactor,
and magnetic mixer equipment is installed in research facilities, pilot
plants and production sites worldwide.
Diaphragm Compressors - for cylinder filling, fuel cell technology, or transfer of high purity or dangerous gases under pressure, without contamination or leakage. PPI's line of diaphragm compressors includes laboratory and production scale models, single and multi-stage models, with displacements to 400 cfm (680 m3/hr) and pressures to 30,000 psi (2000 bar). A variety of head closure designs, power-frames, accessories, and materials of construction allow PPI to match a diaphragm compressor to most process parameters. Hydrogen compressors, fluorine compressors, oxygen compressors, hazardous gases compressors. Fuel Cell Refueling Compressors - PPI diaphragm compressors for high purity hydrogen service are currently operating world wide in a variety of production applications.
Agitated Laboratory Reactors - Pre-engineered stirred reactors for polymerization, catalyst screening and hydrogenation; or custom-designed reactors tailored to your specifications. Available in vessel sizes from 50 to 8000 mL with your choice of agitation, heating, control, and the like.
Custom Reactors and Pressure Vessels - PC Series 5, 10, and 20 gallon stirred reactors for pilot plant and small scale production applications. Custom designed stirred reactors and non-stirred pressure vessels for many applications with sizes from 10 mL to 4000 L and pressure ratings to 150,000 psi (10,000 bar). Tubular, single-ended, and double-ended styles.
Dyna/Mag Magnetic Mixers - Powerful, leak free and easy to maintain magnetic mixers for research, pilot plant, and production applications. The PPI Dyna/Mag magnetic mixer is ideally suited for continuous stirred reactors (CSTR) and batch reactors where mixing and agitation must be contamination-free and leakage cannot be tolerated. The Dyna/Mag mixer is available in several models, offering power up to 25 hp with operating ratings up to 6,000 psi (41 MPa) and 650°F (343°C).
Supercritical Fluid Systems - PPI supplies standard supercritical fluid systems from R&D through pilot plant scale. Components include extraction vessel, separator, high-pressure pump, and complete recycle capability. Among the available standard systems are a 4-liter R&D unit, and a Process Development Unit (PDU). PPI can also engineer and manufacture a system based on your application and specifications.
Other Process Equipment - High pressure valves and fittings, rupture port sleeves, electrodes, check valves, large port valves, gage isolators, threading and coning tools, production quantities of custom- designed items such as double ball check valves. PPI also offers high-pressure polyethylene and urea processing equipment for pressurized processes such as low-density polyethylene, urea, or coal liquefaction.
|Puregas LLC is a manufacturer of air pressurization systems
for the telecommunications industry, compressed air dryers and gas generators
for industrial and laboratory applications. Puregas specialized in supplying
compressed air dryers and CO2 adsorbers for laboratory research and industrial
applications. Puregas manufactures a full line of regenerative air dryers
and adsorbers cost-effectively remove moisture, carbon dioxide and other
unwanted gases from ordinary compressed air, replacing the need for expensive
bottled nitrogen. Puregas adsorbers feature lightweight aluminum construction.
Puregas also offers a wide range of accessories to accompany these product
lines. Featured products:
Puregas Heatless Regenerative Compressed Air Dryers provide dry air without the constant expense of desiccant. The overcome the many disadvantages of refrigeration dryers including reletively high dew points and heavy, unwieldy contruction. Small, lightweight aluminum construction (sizes from 5 x 8 x 11 inches / 12.7 x 20.3 x 27.9 cm and from 7 pounts / 3.2 kilograms). Ideal from OEM and point-of-use applications. Puregase Air Dryers require no piping for water drainage and can be installed in minutes.
Puregas Heatless Regenerative CO2 adsorbers cost-effectively remove both moisture and carbon dioxide from ordinary compressed air, replacing the need for expensive bottled nitrogen. Produced CO2-free air to less than 2 ppm.
Puregas Model PCME-Series Air Dryer / Carbon Monoxide Extractors are unique devices which remove both moisture and CO from ordinary compressed air. This is done by first drying the feed gas using the pressure swing adsorption method and secondly by oxidizing CO to CO2 using a catalyst. Produced CO-free air to less than 2 PPM.
Puregas Model PHCA- Series Hydrocarbod Adsorbers are unique regenerative devices which remove hydrocarbons from ordinary compressed air. This is done using the pressure swing adsorption method. Hydrocarbon-free air to less than 1 PPM.
|Queen Screw and Manufacturing, Inc.|
|Queen Screw and Manufacturing, Inc specializes in the precision machining of plastic components for the medical, instrumentation, microwave, electronics, and chemical equipment industries. Queen Screw and Manufacturing, Inc is a manufacturer and supplier of HPLC and GC components and parts. Specializing in check valves, pump seals, ferrules, compression screws, unions.|
|Schmidlin Labor + Service AG.|
|SCHMIDLIN Labor + Service AG (Switzerland) is a manufacturer of laboratory pure gas generators and industrial gas generators (process gas generators). Schmidlin Labor + Service AG manufactures hydrogen generators, nitrogen generators (LC-MS - nitrogen generators (99.5 % N2) and ICP - nitrogen generators (99.99 % N2), also nitrogen generators includes hydrocarbon removal), oxigen generators, hydrogen and oxygen generators, TOC gas generators, air generators, zero air generators and ultra zero air generators, absorbtion dryers, MAXIGAS- pre-treatment dryers, buffer vessels and compressors.|
|Scott Specialty Gases.|
|Scott Specialty Gases is a manufacturer and supplier of specialty gas products (specialty gases and gas handling equipment). Scott Specialty Gases manufactures a diverse range of specialty gases including high-purity research gases, calibration standards, custom gas mixtures, electronic gases and medical gases. Scott Specialty Gases also offers high quality gas handling equipment and custom gas delivery systems, as well as high-pressure, compressed gas cylinders. Gas Handling Equipment - regulators, flow measurement gauges, filtration, valves, gauges and gas distribution systems.|
|SGT (Scientific Glass Technology).|
|SGT / Scientific Glass Technology (The Netherlands) is a manufacturer of gas purifiers for gas chromatography, GC/MS and LC/MS. SGT manufactures gas filter cartridge systems and inline gas filters (oxigen traps, moisture traps, hydrocarbon traps) for the analytical labs. SGT manufactures capillary column cutters for GC, CE/CEC. SGT also offers speciality glassware, for example injection liners, empty thermal desorption tubes.|
|Sierra Instruments Inc.|
|Sierra Instruments Inc is a manufacturer of mass flow controllers. Mass flow controllers features on-board display and setpoint control, eliminating the need for separate power and readout electronics. Sierra’s Top-Trak flow monitor directly measures the mass flow rate of gases in any range from 0-10 SCCM to 0-50 SLM. Complete with built-in display and power supply, it serves a wide range of inert gas flow applications including process control, flow research, instrument OEMs, gas panels, and flow calibration. This device offers you Tiltable LCD display of mass flow rate in SCCM or SLM, OEM transducer configuration, Portable battery pack, Superb performance: 1.5% accuracy; 0.5% repeatability; two-second response time.|
|Spectral Lab (Спектральная Лаборатория).|
|Spectral Lab (Saint Petersburg, Russia) is a manufacturer of optical emission spectrometers for metal analysis, alloy verification, metal sorting (lab and mobile OES metal analyzers), sample preparation equipment, liquid metal samplers, laboratory equipment for inert gas purification (gas purification furnace).|
|Swagelok Company is a manufacturer of fluid system components includes chromatography fittings and accessories. Swagelok Company manufactures a broad range of chromatographic fittings and accessories for chromatography, including: tubes, pipes, weld fittings, ferrules and nuts, quick-connect couplings, stainless steel hose, plastic hose, and rubber hose, also needle valves, ball valves, check valves, plug valves, and relief valves. Materials include stainless steel, carbon steel, brass, special alloys, and plastics.|
|Taylor-Wharton / RDF-Cryogenics.|
|The Taylor-Wharton's (one of Harsco companies) RDF-Cryogenics
division manufactures liquid nitrogen refrigerators, dewars and freezers.
Taylor-Wharton / RDF-Cryogenics is a manufacturer of cryogenic storage
equipment, including refrigerators, dewars and freezers, vapor shippers
The Taylor-Wharton's Gas Equipment Division is a producer of gas containment equipment, offering the complete network of products and manufacturing capabilities for the gas equipment industry. Products: Fluid and gas cylinders for specialty, laboratory, petrochemical, and electronic gas handling systems. Carbon steel, mechanically polished, electropolished, nickel plated, stainless steel, nickel, and monel cylinders available in DOT and non-DOT specifications.
|Teledyne Hastings Instruments.|
|Teledyne Hastings Instruments is a control instrument company, manufacturer of vacuum measuring and control instruments, and flow measuring and control instruments. Teledyne Hastings Instruments manufactures a complete line of vacuum instruments and flow instruments for the precise measurement and control of vacuum and gas flows. Flow Instruments: The current Models HFM Mass Flow meter and HFC Mass Flow Controller represent the culmination of more than 55 year’s experience in manufacturing quality mass flow instruments. Vacuum Instruments: One of the most versatile Hastings vacuum products is the Model 2002 Dual Vacuum Sensor. All Hastings vacuum instruments use precision sensing devices to provide maximum accuracy.|
|Teqcom Industries is a manufacturer of ultra pure liquid handling components and gas handling components (fittings, valves, sprayers, pumps and custom manifolds). Teqcom Industries manufactures a large family of fluoroplastic fluid components are designed for transporting ultra-pure and difficult to handle liquids and gases. Standard and custom liquid handling and gas handling products in PTFE, PFA, PVDF, PP, PVC.|
|TsvetChrom (Dzerzhinsk, Russia) manufactures laboratory hydrogen generators, nitrogen generators, nitrogen purifier, pure air generator, water purification systems. TsvetChrom manufactures accessory equipment for gas chromatography (syringes).|
|Umwelttechnik MCZ GmbH.|
|Umwelttechnik MCZ GmbH is the German analytical instrument
company, manufacturer and supplier of gas analysis instrumentation and
ancillary equipment for gas analysis, calibration systems for gas analyzers,
gas chromatograph for process contol, environmental analysis and emission
monitoring. Umwelttechnik MCZ GmbH manufactures and supplies gas analyzers,
gas chromatograph, gas collectors, calibration systems for gas analyzers,
inspection stations and test benches, zero and process gas treatment equipment,
gas compounding systems. Air sampler and zero air supply for gas chromatography.
Calibration Systems - Series MK5 / MK10 - The Basic System, a gas blending system with one dilution and one span gas module, to be diluted with bottled span gas. Gas Phase Titration- Reaction of External Span Gas Pre-Mixture with Internally Produced Ozone. Vapor Pressure Saturation- Generating Span Gas Using a Fluid Component Stored in the System. MicroCal 5000- The Calibrating System with Integrated Computer Controls and Data Logger for Gas Analyzing Industry. UV-Basis / Measurement of Ozone Concentration- Direct, UV Photometrical Process to Determine Volume Ratios of Ozone in Span Gas. Span Gas Lab / Span gas generation for the simultaneous calibration of several analyzers.
Gas Chromatograph - The Syntec Spectras GC is the perfect gas analyzer for the computerized measuring of hydrocarbons and other gases in the process technology, in labs, and in the environment analyzing industry. PID detector - optional FID, ECD or WLD. Choose between capillary or packed analysis column. Optional preconcentration unit for measurement ranges starting at 50 ppt (detection limit benzene 0.15 ppb).
Air Sampler - Automatic System for Gas and Dust Samples. The microcomputer controlled air sampler, MicroPNS, is a system for the automatic collection of gases and dust particle samples in adsorbent tubes, bubble flasks and gas mice, or on filters. Up to eight samples can be taken.
Zero Air Supply - Compact Zero Gas Unit with Soundproof Housing for up to 50 L/min. Small Units for the Generation of Zero Gas. The catalytic gas purifier removes hydrocarbons (HC) and CO from compressed air.
Data Acquisition - The MSA interface consists of data acquisition hardware, which is placed between the measuring instruments and calibration systems and the PC.
|Valco Instruments Company Inc. (VICI)|
|Valco Instruments Company Inc. (VICI) is a manufacturers
of gas analysis instrumentation, trace gas analyzer systems, gas chromatography
instrumentation, GC detectors (helium photoionization detector, pulsed
discharge detector, TCD detector). Valco Instruments Company is a one of
the world leading manufacturers of fittings and valves for gas and liquid
chromatography, GC-MS, LC-MS systems. Valco Instruments Company also manufactures
a wide range of related products such as pneumatic and electric actuators,
valve accessories, tubing and sampling loops, heated enclosures, valve
sequence and temperature controllers, digital interfaces, flow controllers,
gas purifiers, pressure regulators and combo valves, syringes and syringe
Gas chromatography instrumentation - VICI manufactures trace gas analyzers (GC systems for gas purity analysis), GC detectors (electron capture, helium photoionization, and multimode versions of the pulsed discharge detector, thermal conductivity detector), hydrogen removal systems, helium purifier and nitrogen purifier. Pulsed discharge detectors (HID)- non-radioactive pulsed discharge detectors utilize a stable, low powered, pulsed DC discharge in helium as an ionization source. Performance is equal to or better than detectors with conventional radioactive sources. Microvolume thermal conductivity detector- dual filament TCD is a stand-alone unit consisting of the detector housing and a controller with electrometer and temperature controls. The Valco miniature helium purifier (HPM) provides "point-of-use" purification of helium or other noble gases, such as Ar, Ne, Kr, and Xe, to sub-ppm levels of reactive gaseous impurities. The nitrogen purifier (NPM) is similar, purifying nitrogen to sub-ppm levels of gaseous impurities.
Gas analysis instrumentation, trace gas analyzers - Valco trace gas analyzers are complete chromatographic systems designed for routine laboratory or process stream analysis of ppb and low ppm impurities in fixed gases. The system can be configured simply for a single gas, such as impurities in hydrogen, or for a range of different gases, such as impurities in helium, hydrogen, and oxygen. Integrated trace gas analyzer (ITGA) is a turnkey integrated trace gas analyzer designed for totally automated analysis of low ppb impurities in bulk H2, O2, CO, CO2, N2, Ar, and CH4. Digital gas dilution system blends gas streams to produce standards over a wide dilution range, thus eliminating the need for individual cylinder gas mixtures in constructing instrument calibration curves.
Portable toxic gas and oxygen monitors (O2 monitor, CO monitor, H2S monitor, SO2 monitor, NOX monitor, NO2 monitor)- VICI manufactures the complete line of personal portable monitors which utilize patented GCI electrochemical sensors for the detection of O2 and toxic gases such as CO, H2S, SO2, NOX, and NO2. These battery-powered personal monitors features sensor cable option for remote sampling.
|Author of the catalogue - Andrey Yurievich Zhdanov.||Автор каталога - Андрей Юрьевич Жданов.|
|Analytical and laboratory equipment companies, scientific instrument companies.||Производители и поставщики аналитического и лабораторного оборудования.|