|Manufacturers and suppliers of infrared spectroscopy equipment, instruments, systems, Raman spectroscopy and imaging systems (FTIR spectrometers, NIR spectrometers, FTNIR spectrometers, Raman spectrometers, FTIR microscopes, Raman microscope and imaging systems, portable, handheld and process NIR, FT-NIR spectrometers, FT-IR spectrometers, process Raman spectrometers, NIR, FTIR food analyzers, diary analyzers, grain composition and moisture analyzers, FTIR, FT-IR-NIR tablet analyzers, FT-NIR, FTIR gasoline analyzers, diesel fuel analyzers).||Производители и поставщики оборудования, приборов, систем для инфракрасной спектроскопии, Рамановской спектроскопии (ИК-Фурье спектрометры, БИК, Рамановские спектрометры, аналитические ИК-Фурье микроскопы, Рамановские микроскопы, портативные, переносные и промышленные ИК-Фурье, БИК, Рамановские спектрометры, ИК-Фурье, БИК анализаторы состава пищевых продуктов, зерна, влагомеры зерна, анализаторы лекарственных средств, анализаторы состава нефтепродуктов).|
|Manufacturers and suppliers of infrared spectrometers (IR spectrometers), FT-IR spectrometers, near infrared (NIR) spectrometers, FT-NIR spectrometers, Raman spectrometers.||Производители и поставщики инфракрасных спектрометров, ИК, ИК-Фурье спектрометров, БИК спектрометров, БИК-Фурье спектрометров, Рамановских спектрометров.|
|International companies index.||Международный указатель компаний.|
|AABSPEC Instrumentation Corporation.|
|Aabspec Instrumentation Corporation is a manufacturer of products for ultra-high temperature spectroscopy, low-temperature spectroscopy, high pressure spectroscopy, vacuum spectroscopy, transmission, specular and large angle reflectance, UV irradiation, Raman, GC-FTIR, TGA-FTIR, LC-FTIR, GPC-FTIR, direct-evolved gas analysis- FTIR, SFC-FTIR, variable temperature / variable pressure FTIR microscopy, dual-sample comparitive spectroscopy, and special application products. The company's products cover IR, near-IR, Vis, and UV optical ranges. The new Microscope Hot Stage, suitable for all popular FTIR and Raman Microscopes.|
|ABB process control instrumentation, process analytics.|
|ABB (ABB Instrumentation and Analytical)
is the process control instrumentation, process analytics manufacturer
and instrumentation solutions supplier. Instrumentation includes actuators
and positioners (a complete family of valve automation products), flowmeters
(gas flow meters, steam, liquid, slurry flow meters), temperature transmitters
and sensors, pressure transmitters and remote seals, remote sensing measurement
devices, industrial process signal monitoring and logging devices, process
recorders and controllers, process gas analyzers (continuous gas analysis
and emission monitoring instruments, SEMS, hydrogen purity analyzers, purge
gas analysers, combustibles analyzers, zirconia oxygen analyzer), at-line
gas chromatographs, laboratory gas chromatographs, process gas chromatographs
(GC system for simulated distillation, sulfur in fuel GC analyzer), gas
chromatograph sample handling systems, multiwave process photometers (fiber
optic photometer, IR, UV photometers), laboratory and process FTIR-NIR
spectrometers (FT-IR / Near-IR composition and moisture measurement analyzers,
on-line gasoline analyzer), physical property measurement analyzers (on-line
Reid vapor pressure analyzers), hydrogen sulfide analyzer for the measurement
of hydrogen sulfide in gas streams, water quality analyzers.
Process analytical instruments and systems for the continuous gas analysis and emissions monitoring (gas analyzers for the continuous measurement of process gases): Cement kiln gas analysis system with special gas sampling system for an effective monitoring of the combustion process in a cement plant. Continuous emission monitoring systems (SEMS) for the measurement of hazardous emissions, based on NDIR and FTIR analyzer technology. Continuous gas analyzer system for simultaneous determination of up to 12 measuring components like HCl, CO, NO, SO2, NO2, N2O, NH3, H2O, CO2, HF, O2 and C total.
Metallurgy analyzers (FTIR-NIR molten metal analyzers) for the inclusion identification and quantification analysis, hydrogen measurements in liquid aluminum (liquid aluminum purity analyzers, metal quality measurement systems). ABB offers a complete range of analytical solutions to the aluminum industry: hydrogen analyzer, inclusion analyzer, melt cleanliness analyzer. A metallographic analysis service is also available.
Raw material identification FTIR-NIR system (measurement time only 5 to 10 seconds per sample) requires no sample preparation and can be performed by unskilled operators in the laboratory or at the receiving dock. Solids and liquids can be analyzed through plastic bags and glass containers to avoid sample cross-contamination, accessory cleaning and cleaning procedure validation.
The MB Pharma FTIR-NIR analytical system (14000-3800 cm-1) can analyze solid samples in diffused reflectance mode by either using the hand-held fiber optics probe, for remote sampling, or by using the Powder Samplir main compartment accessory. Liquids can be identified with the disposable glass vial sampling accessory. The FTLA Pharma FT-NIR analyzer - main building block for pharmaceutical QA/QC solutions. Wavelength repeatability (±0.002 cm-1) of the instrument and the wavelength reproducibility (±0.04 cm-1 ) between instruments enables ABB to guarantee method transferability. The FLTA Pharma accommodates the mounting of two separate sampling accessories. The open design of the Arid-Zone sample station makes for effortless sample loading and analysis. The various prealigned sampling accessories can be installed without adjustments.
Moisture measurement in solids and lyophilized products - Moisture or solvent determination can be achieved in less than a minute without sample preparation. The analysis is non-destructive and is normally done using glass vials. Lyophilized solids can be analyzed through a normal (freeze-dried) vial without loss of its valuable contents. The rotating Powder Sampling Accessory provides highly repeatable moisture measurements because of the sample averaging performed during the disposable vial rotation. Moisture content of powder material can be determined down 0.1-0.2 % with very high precision.
The FTLA2000-PH60 Pharma NIR analyzer analyzer can analyze coated and uncoated tablets, caplets, capsules, gelcaps, in less than a minute. Content uniformity analysis can normally be performed with very high precision (<2% relative) for tablets with API concentration as low as 0.5%. Analysis requires no sample preparation, can be performed by unskilled operators, and can be automated using a 30-sample carousel. Both active ingredient and excipient concentrations can be measured in a single analysis. Content uniformity analysis can easily be done in a production environment near the tablet press. The Tablet Samplir accessory comes with 2 universal trays for the analysis of spherical and cylindrical shaped dosages.
|Agilent Technologies is a manufacturer
of GC, GC-MS systems, HPLC, SFC, GPC/SEC systems, LC-MS systems, capillary
electrophoresis systems, FTIR spectrometers, FTIR microscopes, UV-visible-NIR
spectrometers, fluorescence spectrometers, NMR spectometers, AAS instruments,
ICP-AES, ICP-MS systems, X-ray crystallography systems, pharmaceutical
testing equipment (dissolution apparatus, tablet testers), PCR instruments,
lab automation solutions, lab robotics, laboratory software suite. Agilent
Technologies is a manufacturer of mass-spectrometer helium leak detectors,
vacuum pumps (rotary vane, dry scroll, diffusion pumps, turbomolecular
pumps, ion pumps), high vacuum pumping systems, vacuum gauges, valves,
Agilent Technologies manufactures atomic absorption spectrometers (flame AAS instruments, GF AAS instruments), inductively coupled plasma atomic emission spectrometers (ICP-OES systems), inductively coupled plasma mass-spectrometers (ICP-MS systems). Agilent Technologies manufactures FTIR spectrometers, FTIR microscope systems (FTIR spectrochemical imaging systems), FT-IR dedicated oil analyzer, fluorescence spectrometers, UV-Visible spectrophometers. Agilent Technologies manufactures research grady nuclear magnetic resonance spectrometers (high resolution NMR spectrometers). Agilent Technologies manufactures X-ray crystallography instruments (XRD, X-ray diffractometer system).
|Analytical Spectral Devices, Inc.|
|Analytical Spectral Devices, Inc. (ASD) is a manufacturer field portable and laboratory UV-visible-NIR spectrometers, spectroradiometers (remote sensing spectrometers), portable NIR analyzers, Vis-NIR analyzers. Analytical Spectral Devices manufactures lab and portable spectrometers covering the ultraviolet, visible and near infrared (NIR) wavelength ranges. Analytical Spectral Devices manufactures benchtop visible-NIR spectrometer systems and portable visible-NIR analyzers equipped with fiber optic probe. Analytical Spectral Devices manufactures rugged portable and mobile Vis-NIR analyzer systems for quality control of foods and pharmaceuticals - portable counterfeit drug detection systems, drug verification system, meat quality analyzer (beef tenderness analyser). Analytical Spectral Devices manufactures portable, rugged Vis-NIR analyzer equipped with the plant probe and leaf clip assembly for rapid in-field analysis of both living foliage and dried plant materials for the determination of nitrogen, lignin, cellulose and soluble sugars in plant tissue.|
|Andor Technology, Ltd.|
|Andor Technology is a manufacturer and supplier of multichannel detector systems for optical spectroscopy and scientific imaging. Andor Technology specializes in providing the complete system: the detector head, the PC-compatible controller card and user-friendly software. A variety of multichannel detectors including PDA, CCD and ICCD are available for more demanding applications such as ultra low light or pulsed light spectroscopy. Turn-key multichannel instruments like the Raman spectrometer have been manufactured for routine applications such as quality control.|
|B&W Tek, Inc.|
|B&W Tek, Inc. is a spectroscopy instrument company,
manufacturer of array spectrometer modules, miniature spectrometer systems,
Raman spectrometers, laser systems and modules, laser components, light
sources and sampling accessories for optical spectrometers. B&W Tek
manufactures high power lasers systems, laser systems and modules for analytical
and scientific instruments, including DPSS (diode pumped solid state) and
diode lasers, multi-channel lasers, spectrum stabilized lasers, fiber lasers
and amplifiers, fiber coupled lasers, broadband light sources. B&W
Tek manufactures compact optical spectrometers (miniature UV, Vis, NIR
array spectrofotometers, array spectrofluorometer - oil analyzer), mobile
and portable Raman spectrometer systems, process Raman spectrometer, broadband
(UV, Visible, Near Infrared) on-line analyzer, and fiber coupled Raman
probes for on-line process measurement and control.
Broadband (UV, Visible, Near Infrared) on-line analyzer system features high speed spectra capturing (more than 100 spectras per second), industrial design (NEMA 4X or IP65 enclosure, temperature cooled and regulated). The non-contact systems incorporate a long lifetime light source and a grating based broadband array spectrometer. Various spectrometers can be used to select wavelength ranges between 190 and 2900 nm. An air curtained sampling window, and a temperature regulation system are also included as standard items. These analyzer systems are designed for use in industrial applications as on-line process measurement and control units by measuring sample diffuse reflectance, transmittance, fluorescence, or Raman scattering characteristics.
B&W Tek manufactures high resolution compact, mobile Raman spectrometer, portable benchtop Raman excitation laser, battery operated portable Raman spectrometer. B&W Tek manufactures miniature CCD spectrophotometer for sample transmission and absorption measurements from 190-1050 nm., and CCD spectrofluorometer, both features compact and highly reliable non-moving part design.
|Brimrose Corporation of America.|
|Brimrose Corporation is the analytical instrument company,
manufacturer of the AOTF-NIR spectrometers for real-time, on-line industrial
process control, raw materials identification, quality control in chemical,
petrochemical, food, dairy, cosmetic, pharmaceutical operations (portable,
laboratory, process NIR analyzers). Brimrose Corporation is a US manufacturer
of and laser diode modules for OEM users. Brimrose Corporation manufactures
near-infrared and mid-infrared spectrometers for at-line and batch process
monitoring, features small size, high speed and robust construction. The
Brimrose AOTF-NIR spectrometers have a compact, rugged, industrial hardened
design without any moving parts to be suitable for industrial applications.
The Acoustic Optic Tunable Filter Near Infrared (AOTF-NIR) technology enables
the Brimrose spectrometer to scan very fast and without using moving parts.
The AOTF-NIR spectrometer collects spectral data up to 16,000 wavelengths
per second. The Brimrose 16 channel multiplexer provides cost-effective
measurement of multiple streams in a production process. Analyzers can
be placed at numerous points in the process and calibrations can be transferred
from the laboratory to the industrial process. Brimrose Corporation manufactures
miniature "Hand-held" NIR analyzer, miniature laboratory NIR analyzer,
bench top laboratory NIR analyser, process NIR analyzer, process NIR analyzer
with built-in multiplexer, miniature Free Space process NIR analyzer, ThinFilm
NIR analyzer, dual purpose NIR analyzer, gasoline blend control NIR analyzer,
"Seed Meister" NIR analyzer, Tablet NIR Analyzer.
Miniature "Hand-held" NIR Analyzer is a solid-state AOTF-NIR spectrometer system designed for the field portable non-destructive, contact, non-contact measurements of chemical and physical properties of powders, solids, liquids, gels in diffuse reflectance mode. Additional probe attachments allow use same analyzer for liquid transmission measurements. Battery operation optional. Miniature solid-state AOTF-NIR laboratory analyzers are designed for measuring the chemical and physical properties of liquids, solids, powders, gels in labs and warehouses, field by using variety of probes, flow cells, sample attachments.
The ThinFilm analyzers are designed for measuring on line chemical and physical properties on a wide range of substrates and coatings. Provides measurement of chemical composition, coating weight and thickness, non-contact analysis, real time at-line, in-line, on-line monitoring and control. Applications include thickness of organic lacquer or lubricant on metallic foils, tin-plate, sheet steel, metalized polymers and similar products. Coating weight of adhesive and residual solvent are also routinely measured. The analyzer can either be mounted on a traveler and scan across the web or measure statically.
The Free Space AOTF NIR diffuse reflectance analysers provides high performance measurements by direct placement in sample lines for applications such as: inspection of tablets and vials, seeds and feed measurements on pipes, in-situ measurement of pellets, films and coatings, cotton/polyester ratio directly in the web, moisture monitoring, thickness and coating measurements directly in the webs for the need to measure chemical composition, physical parameters and additives in their many polymer products.
The Seed Meister is a system specifically developed for high-speed discrimination, quantification, and sorting of Hybrid seeds (corn, soybeans, coffee, watermelon, peanuts). This system data acquisition provides the capability of sorting up to 60 individual seeds per minute. Provides important constituent information such as oil, protein, starch, moisture, low / high oleic, sugar content are measured simultaneously. In many cases, Vigor / Emergence of seeds can be predicted as well. Also fruit inspection, sorting of apples, pears and oranges, analyzing of juices and more (real-time online monitoring sugar content, pH, acidity, firmness and brix of juices). Fish feed inspection and quality analysis for the protein, oil, and moisture content.
Tablet NIR Analyzers are designed for the non-contact, non-destructive measurements of chemical and physical properties of tablets in tablet transmission and tablet diffuse reflectance modes. The solid-state AOTF-NIR analyzers include special belt-driven mechanism to create total automatic solution for tablet manufactures. Spectrometer can simultaneously analyze tablets on belt of another sampling system in transmission and diffuse reflectance modes at same time. System includes NEMA 4X stainless steel optical module with transmission and reflection detectors, NEMA 4X belt driven orientator, embedded computer.
|Bruker is a manufacturer of quadrupole, ITD, TOF mass-spectrometers,
GC/MS, MS/MS, LC/MS/MS systems, FTIR, FT-NIR, Raman spectrometers, NMR,
EPR spectrometers, NMR analyzers, X-ray fluorescence spectrometers, portable
XRF analyzers, X-ray diffractometers, single crystal diffraction instruments
(XRD, SCD systems), spark-OES metal analyzers, combustion elemental analyzers,
portable ion mobility spectrometers, portable FTIR analyzers, biological,
chemical and nuclear detection instruments. Bruker Scientific Instruments
Division (Bruker AXS, Bruker BioSpin, Bruker Daltonics, Bruker Optics)
offers a broad range of instruments and solutions for analytical chemistry,
life sciences, clinical research, materials research, environmental analysis,
forensics, lab automation, process control, quality control.
Bruker Daltonics manufactures MALDI-TOF MS systems, MALDI-TOF/TOF mass-spectrometer systems, ESI/MALDI quadrupole-TOF MS systems, ESI-ITMS systems, ultra high resolution ESI/MALDI-FTMS systems. Bruker Daltonics offers microbial identification system using MALDI-TOF mass-spectrometry. Bruker Daltonics manufactures a broad line of chemical, biological, radiological, nuclear detection instruments, such as transportable, mobile MS and GC/MS systems, portable ion mobility spectrometers, portable FTIR spectrometers (portable FTIR analyzers).
Bruker Optics manufactures research FT-IR spectrometers, FT-NIR spectometers, Raman spectrometers, FT-Raman and FT-IR microscopes, process FT-NIR analyzers, time domain low resolution NMR spectrometers (low resolution benchtop NMR analyzers for QC/QA), terahertz spectrometers, imaging spectrograph and scanning monochromator. Bruker Optics manufactures specialized FT-NIR spectrometers for a wide range of NIR applications in QA/QC and process control, FT-NIR spectrometer for in-line process control with non-contact analysis capabilities. Bruker Optics offers high resolution FT-Raman spectrometers for both research and process control solutions, process Raman systems, FT-Raman microscopes for non-destructive analysis of microscopic samples. Bruker Optics manufactures automated infrared detection system for real-time remote sensing of atmospheric compounds.
|Buck Scientific (USA) is a manufacturer of atomic absorption spectrophotometers (graphite furnace atomic absorption spectrometer), GF atomic absorption instrument spares and accessories, IR spectrophotometers, IR spectroscopy accessories and instrument spares, UV/Visible spectrophotometers, UV-Vis cuvettes and instrument spares, gas chromatographs, GC accessories and instrument spares, high performance liquid chromatographs, HPLC accessories and instrument spares, mercury analyzer (Hg analyzer), mercury analyzer accessories and instrument spares, total hydrocarbon analyzer (IR photometer - oil in water analyzer), flame photometers (low temperature, single channel flame photometers), flame photometer accessories and instrument spares, sodium analyzer (sodium flame photometer).|
|BUCHI (BUECHI) Labortechnik AG.|
|BUCHI Labortechnik AG is a manufacturer of analytical instruments (FT-NIR spectrometer - composition analyzer with fiber optic probe, designed for the fast materials identification, qualitative and quantitative chemical analysis, quaility control in chemical, food, pharmaceutical industry, Kjeldahl total nitrogen analyzer) and laboratory equipment for evaporation and sample preparation.|
|Carl Zeiss AG.|
|Carl Zeiss is a manufacturer of analytical and scientific equipment: optical microscopes, fluorescence microscopy systems, microimaging systems for biology and medical sciences, materials analysis, scanning electron microscopes, transmission electron microscopes, optical and electro-optical components (gratings, spectral sensors, spectrometer components), spectrometer systems, dedicated analytical solutions (process analyzers, concentration measurement systems). Carl Zeiss manufactures lab and process spectrometer systems (UV-VIS-NIR range)- at-line, in-line, on-line analyzer systems for the measurement of color, concentration and layer thickness. Carl Zeiss manufactures fiber optic process spectrometer - analyzer system for process measurement and control.|
|CCS Services (russian representation of CCS Services SA) supplies portable arc OES alloy sorter, portable and desktop spark OES spectrometers - metal analyzers, handheld XRF spectrometers - metal analyzers, atomic absorption spectrometers, hollow cathode lamps and graphite parts for AAS instruments, ICP-AES spectrometers, ICP-MS spectrometers, sample introduction systems for ICP-OES and ICP-MS spectrometers, mercury analyzers, GC, GC/MS systems, HPLC systems, LC/MS systems, FTIR spectrometers, UV-Visible-NIR spectrophotometers, fluorescence spectrometers. CCS Services supplies microwave digestion systems, microwave ashing systems, microwave extraction systems, microwave sub-boiling acid distillation system (Milestone Srl). The company supplies laboratory water circulators, water chillers, circulating water baths. CCS Services supplies vacuum pumps (dry scroll pumps, rotary vane pumps, diffusion pumps, turbomolecular pumps, ion pumps), high vacuum turbomolecular pumping systems, ion and titanium sublimation pumping systems, vacuum and controllers, helium mass spectrometer leak detectors, high vacuum fittings and valves, spare parts for Varian pumps (now Agilent Technologies).|
|ChemImage is a manufacturer of spectrometer systems for
chemical imaging (molecular spectroscopy + digital imaging = molecular
images that detail material morphology, composition, structure, concentration).
ChemImage manufactures Raman spectrometer based chemical imaging system
for a wide range of researh and industrial applications (Raman chemical
imaging + broadband UV-excited fluorescence chemical imaging + laser-excited
fluorescence chemical imaging + near-infrared or NIR chemical imaging +
visible absorption chemical imaging)- for materials analysis, pharmaceuticals
analysis and quality control (blend uniformity and particle sizing of tablets,
coating layers chemical identity, percent composition determination of
active and inactive ingredients, thickness uniformity and interfacial chemistries
of controlled-release systems, ingredient-specific particle sizing of nasal
sprays, emulsions, suspensions). Spectrometer system provides the non-invasive
pharmaceuticals imaging and analysis through packaging, such as blister
packs, glass containers, plastic bags.
ChemImage manufactures macroscopic chemical imaging system for forensic applications, such as determination of forensic samples morphology. ChemImage manufactures transportable, mobile fluorescence microscope + Raman spectrometer system for on-site detection and identification of hazardous materials, chemical warfare agents, patogenic organisms in a wide range of solids and liquids. ChemImage is a developer of chemical imaging software that allows simultaneous visualization and manipulation of images and spectra.
|CIC Photonics Inc.|
|CIC Photonics Inc is a manufacturer of Industrial Gas Analysis
Systems, Fiber-Optic Chemical Analyzers and FTIR Accessories. CIC Photonics,
Inc. produces a selection of long path gas cells and gas analysis systems
that can detect undesirable gaseous impurities. CIC Photonics Inc design
and manufacture precision analytical instruments for chemical spectroscopy
in research, environmental, and industrial applications. Short and long
path gas cells, fiber-optic probes, multiplexers, spectrophotometers, and
FTIR/VIS/UV sampling accessories. New products: LASR16 16-meter gas cell
for laser spectroscopy; VARR variable field reflectance and Raman probe;
Auto-Fresnel multiple sample single bounce ATR.
Turnkey Industrial System for Moisture Analysis in Corrosive Gases - A turnkey Integrated Real-time Gas Analysis System (IRGAS), consist of a newly-designed 4-meter pathlength White Cell which has been combined with a low-cost FT-IR spectrometer, multi-feature stainless steel gas handling manifold, high-vacuum corrosive gas pumping stations, industrial-ruggedized computer hardware and software package, and purgeable stainless steel safety enclosure. The software permits overall operation and control of individual system components as well quantitative analysis of moisture content.
|Etalon (Эталон ПТЦ).|
|Etalon (Moscow, Russia) offers technical servicing and upgrading of analytical instruments: atomic-absorption spectrometers, UV-visible, IR spectrometers, FTIR spectrometers, fluorescence spectrometers, GC systems, HPLC systems, elemental analyzers, thermal analysis systems. The company offers technical servicing of electron microscopes. The company also supplies used and refurbished AA spectrometers, FT-IR spectrometers, UV-Vis spectrophotometers, fluorimeters, spectrofluorimeters, GC systems, HPLC systems, CHNOS analyzers, thermal analysis instruments (STA systems, TGA systems). Spares, lamps.|
|The FOSS Group consists of the parent company FOSS A/S
in Denmark, 3 R&D and manufacturing companies in Denmark, Sweden and
USA, an R&D unit in the UK, and 18 sales & service companies and
representative offices world-wide. FOSS Group is a manufacturer and supplier
of analytical solutions (quality analyzers) for analysis and quality control
of the production of agricultural, food, pharmaceutical and chemical industries.
FOSS is a manufacturer of dairy analyzers, food and agricultural products
analyzers, Foss Electric and Foss Tecator are manufacturers of wet chemistry
analyzers and wet chemisrty apparatuses.
The range of automated grain analyzers supplied by Foss Tecator-Products for Grain Analysis: Infratec series Grain Analyzers, Whole Grain Analyzer, Whole Grain On-line Analyzer, GrainCheck Analyzer. Products for Feed and Forage Analysis: Feed and Forage Analyzer, NIR On-line Feed Analyzers, WinISI Software Products.
FOSS offers solutions for the routine analysis of beverages. Applications ranges from classical wet chemistry Kjeldahl protein to fully automatic analysis of all the basic parameters of wort/beer or wine. The fully automated SCABA 5610 Beer Analyzer can measure the specific gravity, alcohol, pH * and colour* of any type of beer or wort. WineScan FT 120 is a fast and convenient tool for measuring a wide range of wine quality parameters. These include ethanol, reducing sugars, pH, folin C index, gluconic acid and total acid.
Dairy industry- The FOSS concept of Integrated Milk Testing offers high-speed, cost-effective analysers providing such data: MilkoScan for compositional analysis, Fossomatic for somatic cell counting and CombiFoss, a combination of the two. As part of the same concept, the BactoScan provides total bacteria count. MilkoScan S 50 for milk and cream applications, MilkoScan FT 120 for more complex liquid products and specific parameters, Infratec 1255 for cheese and butter, Routine Dairy Analyzer for powders.
Rapid Analysis of Meat and Meat Products, Compositional Testing of Meat Samples- The Meatspec instrument from FOSS makes meat testing easy and reliable, analysis is based on Near-Infrared Transmission and PLS calibration. Meatspec is used to determine fat, moisture and protein in raw meat and meat raw materials. The Infratec 1265 Meat Analyser is the at-line instrument for easy meat testing, determining fat, moisture, protein and collagen in raw meat, in meat blends also containing other ingredients, and in final meat products.
|Grabner Instruments GmbH.|
|Grabner Instruments is a manufacturer of petroleum testing equipment, fuel analysis instrumentation. The IROX mid-FTIR analyzer series are the only truly portable and fully automated FTIR fuel quality testers that allow a fast and highly precise analysis of gasoline and diesel fuel directly in the field. IROX 2000 - Portable Gasoline Analysis with MID-FTIR. IROX 2000 is an extremely compact, robust and user friendly Mid-FTIR spectrometer for the automatic measurement of the concentration of the most important components of gasoline. Thanks to an improved mathematical model and the use of a built-in density meter the instrument additionally provides most reliable results for key properties such as Octane Numbers, Distillation Properties and Vapor Pressure. A large number of country specific calibration samples is stored. IROX Diesel - Portable Diesel Analysis with MID-FTIR. IROX Diesel is a Mid-FTIR analyzer dedicated to Diesel analysis: With a different spectometer cell, it's own on-board software and a vast calibration library handling is as easy as with the gasoline unit. This instrument also uses an improved calculation model, based on Cluster analysis and MLR, for the determination of the key properties of diesel fuel such as Cetane Number, Cetane Index and Distillation Properties. IROX DIESEL has been upgraded for a new application: the determination of the FAME (Biodiesel) content in Diesel Fuel.|
|Guided Wave Inc.|
|Guided Wave Inc is a manufacturer of process analytical
systems (process analyzers) for VIS and NIR in-line composition monitoring,
process probes and flow cells for the chemical and materials processing
industries. Guided Wave designs and manufactures near infrared spectrophotometric
analyzers that provide real time information about a chemical or laboratory
process. Guided Wave supplies probes manufactured in compliance with ASME
or CSA pressure vessel standards when required by the application. GW is
unique in that it is the only VIS/NIR instrument manufacturer designing
and building their own spectrophotometers, probes, and fiber optic cables.
Process NIR Analyzers: Model 412 - Known for reliability, stability and sensitivity, this dual beam system has a patented multiplexer for 3 to 12 channel operation. CLASS-PA software interfaces easily with DCS systems for digital control. Lab 412 - For Pilot Plants, at-line measurements, and QC Labs, the Lab 412 provides Model 412 technology in an affordable 1 or 3 channel transportable NIR unit. Client-Server software allows the transmission of results, alarms, and a wide variety of other information between the analyzer and the plant DCS or other plant computers.
H2O2 Vapor Monitor - Reliable and fast monitoring of hydrogen peroxide and water vapor in sterile barrier operations.
Process Probes and Flow Cells: SST Probe - The Single Sided Transmission Probe is the most popular Guided Wave probe. It offers direct insertion into the process line, no troublesome sample system required. It is available in two designs, one with gold brazed windows and one sealed with o-rings. A wide variety of materials of construction along with process interfaces are available, including permanently mounted flanges.
Process Flow Cells - Several durable flow cells are available. Stainless steel is standard but Teflon is also available for semiconductor and acid use. For lethal service, the patented high Safety Flow Cell offers in-line monitoring with backup seals and a sniffer port. A wide variety of o-ring seals are available.
Extruder Probe/Cell - A pair of these high temperature and pressure probes with a spool piece allows monitoring an extruder process in real-time. Like many Guided Wave probes, it is available in UV, visible, and NIR Long. Path Flow Cell – This axial-flow cell is used for samples requiring pathlengths from 25 mm to 100mm. It is ideal for trace chemical detection. Also Specialty Remote Optical Sensing Assembly and Fiber Optic Cable.
Laboratory Accessories for Spectroscopy: Bulbs, Printed Circuit Boards, Purge equipment, GW Rated Calibrated SMA Torque wrench, I/O Box and Validation Filter.
|Hamilton Sundstrand - Applied Instrument Technologies (AIT).|
|Hamilton Sundstrand - Applied Instrument Technologies is
a manufacturer of process and laboratory FT-IR and NIR, process mass spectrometers,
process gas chromatographs and FIA analyzers. Hamilton Sundstrand - Applied
Instrument Technologies (formerly AIT is the process analytical business
unit of the Sensor Systems Division of Orbital Sciences Corporation) manufactures
Analect FTIR / NIR Analysers, MGA Process Mass Spectrometers, PIONIR Near-Infrared
Analyzer, Foxboro Process Gas Chromatographs (the AIT/Foxboro 931 Series
PGCs) and CS 200 Amine Stream Analyzers. High reliability, high precision
and the ability to perform in harsh environments are common features of
all AIT analyzers and analytical instruments. Hamilton Sundstrand's chromatographic
and spectroscopy technologies can monitor gases, liquids, solids, slurries,
and supercritical fluids in a broad range of temperatures and pressures,
as well as in hazardous environments. Product lines:
Analect near-infrared and mid-infrared on-line process monitoring systems offer a variety of enclosures, sampling interfacing and control hardware, and data processing options. FTIR / FTNIR Analect has over 1,000 process development and on-line FTIR/FTNIR systems serving the chemical, petrochemical, refining, pharmaceutical, and general manufacturing industries worldwide in a wide range of product configurations. The patented Transept IV refractively scanned interferometer is the core technology used in all Analect FTIR and FTNIR systems. These rugged instruments are configured into reliable and low maintenance analyzers that provide real-time, repeatable data under the most extreme conditions. Solid sampling accessory for powders and pellets. A variety of software packages for QA/QC and reaction monitoring with add-on modules for advanced quantitative analysis and other special applications.
The ChemEye - An FTIR or FTNIR system for real-time dynamic monitoring of reaction chemistries such as end point determinations, reaction kinetics, organic synthesis, and fermentation. Probe flexibility and a small footprint allows the ChemEye to fit inside a normal fume hood and it is compatible with all automated reactors and reaction calorimeters.
PIONIR 1024 Process NIR Refinery Analyzers- Simultaneously measures multiple properties - including RON, MON, PON, oxygenates, distillation points, gravity, aromatics, and olefins in gasoline and unit stream analysis. Also used to monitor properties such as cetane number, cetane index, aromatics, and distillation points in heavy distillate streams including diesel fuel. PIONIR MVP Near-IR Systems- Features the same optics and delivers the same analytical performance as the PIONIR 1024 process analyzer for use in model development or as a stand-alone analyzer. The analyzer features a fixed holographic grating and photodiode array detector with no critical moving parts. The PIONIR and MVP use fiber optic cables to transmit light to the sample probe, allowing remote installation of multiple sample probes. Fiber optics allow probe placement up to 1 km from analyzer. Complete Sample systems are available.
|Headwall Photonics Inc.|
|Headwall Photonics, Inc (formerly American Holographic Inc) is the spectroscopy instrument company, designs and manufactures advanced optical solutions that manage wavelengths for customers requiring application-specific performance. Headwall Photonics, Inc is the specialists in optical engineering and high volume nanostructure manufacturing. Headwall Photonics, Inc is a manufacturer of precision spectral modules and original holographic diffraction gratings. Headwall Photonics, Inc manufactures spectral modules and spectrographs, original holographic gratings: concave, convex, and planar designs, and offers optical design services.|
|Horiba is a manufacturer of optical spectroscopy instruments (fluorescence, Raman spectrometers and microscopes, NIR spectrometers, NDIR, FTIR gas analyzers, UV spectroscopic process gas analyzer, ambient ozone monitor, UV fluorescence sulfur in-oil analyzer), electrochemistry instruments, elemental analysis instruments (ICP-OES, glow discharge spectrometers, XRF spectrometers, EDXRF microspectrometer, XRF sulfur in-oil analyzers, C, H, N, O, S analyzers), environmental analysis instruments, emissions measurement instruments (air pollution analyzers, engine exhaust gas analyzers, stack gas analyzers, continuous emission monitoring systems, CEMS), water analysis instruments (handheld water quality meters, process water analyzers, water quality monitors), particle size, particle shape, zeta potential, and surface area analysis instruments (particle size, particle shape analyzers, surface area analyzers, zeta potential analyzers), thin film measurement instruments (ellipsometers). Horiba also manufactures gratings and OEM mini CCD spectrometers.|
|Infrared Analysis, Inc.|
|Infrared Analysis, Inc specializes in the measurement of gases. Infrared Analysis, Inc is a manufacturer of long pass gas cells, quantitative database, infrared gas analysis software, and automated measurement system allows real time monitoring of hundreds of gases simultaneously down to ppb levels. Infrared Analysis, Inc manufatures long path cells for gas measurement, with optical paths from 1 meter to 1 kilometer. Supplies database of infrared gas phase reference spectra for quantitative analysis and QASOFT automated and user-interactive computer programs for measuring and reporting gas concentrations. Adjustable-focus retro-reflector and multiple-pass optics for open path gas measurement. Infrared Analysis, Inc is a supplier of complete anaytical systems for FT-IR multi-component gas analysis that work both in extractive mode and open path mode. Infrared Analysis will supply a ready-to-use gas handling system with one of its absorption cells.|
|Infrared Focal Systems, Inc.|
|Infrared Focal Systems, Inc. is a
manufacturer and supplier of infrared transmitting fiber optics, bulk glasses
and spectrometers for sensor and laser power delivery applications, handheld
infrared spectrometer based on the acousto-optic tunable filter (AOTF)
and software or plastics identification.
Infrared Focal Systems has developed a handheld infrared spectrometer based on the acousto-optic tunable filter (AOTF). This line of products includes the “PlastiScan” handheld plastics identifier for plastics recyclers and a portable infrared spectrometer for scientific and industrial applications. The PlastiScan SH software for plastics identification is installed for PlastiScan SH. The following types of plastics can be included in a typical data base: ABS, PP, PS, PC, PVC, PBT, PA, PET, PC/ABS, AS, POM, PMMA, PUR, PE, PVD, PPO and PVC/ABS. Other types are possible by custom order.
Infrared Focal Systems is a manufacturer of AOTF (Acousto-Optic-Tunable-Filter) Spectrometer - This spectrometer boasts exceptional speed and stability while maintaining low noise. It has applications in both industry and laboratory. Handheld infrared spectrometer based on the AOTF. Features include high speed, no moving parts, and battery operation. This handheld instrument is very fast and convenient to use. The instrument operates by scanning the near-infrared spectrum of the sample, using an acousto-optic tunable filter (AOTF).
The AOTF is a birefringence crystal capable of rapid and precise wavelength selection. It may be used as the heart of a spectrometer or monochromator for applications in the UV through mid-IR. Advantages over a filter wheel or grating monochromator include high resolution, high speed, random or sequential wavelengths access, no moving parts, compact size, and imaging capabilities.
Infrared Fiber Systems, Inc produces the Germanium Oxide glass fiber (HP fiber) for use with the Er:YAG and Er:YSGG lasers. These lasers coupled with HP fiber delivery systems can be used for painless dentistry and precise ablation without thermal damage in laser surgery procedures. Infrared Fiber Systems, Inc also manufactures fluoride glass fibers (SG fiber) for use in a variety of industrial and scientific sensor systems such as temperature sensing and remote chemical analysis. These fibers transmit from the ultraviolet through 5 microns in the mid-infrared.
|InPhotonics is a manufacturer of Raman fiber optic sampling
probes and accessories, and fiber optic Raman spectrometers for industrial,
laboratory and field chemical analysis. InPhotonics has developed numerous
specialized Raman systems to meet specific customer requirements for analytical,
quality control, and process monitoring applications. InPhotonics is a
manufacturer of the InPhotote, a portable Raman system for field identification
of unknown chemicals. Several fiber optic probes for sampling under difficult
environmental conditions and constrained space have been successfully engineered
and installed. InPhotonics manufactures a complete line of fiber optic
probes based on the original RamanProbe optical design. The RamanProbe
II is a versatile solution where solids and liquids need to measured through
containers or by immersion. For reaction monitoring, a high pressure RamanProbe
enables in situ measurement at elevated pressures. InPhotonics manufactures
process probes to withstand demanding chemical and physical environments.
The RS2000 Raman spectrometer features high resolution and full spectral range capabilities in a system with no moving parts or throughput-limiting slits. Unique to the system is an echelle spectrograph that offers light dispersion in two dimensions to fully exploit the CCD detector area. The result is better than 1 cm-1 spectral resolution from 200- 3500 cm-1 (Raman shift). Combined with the RamanProbe for remote sampling, the RS2000 is the ideal Raman spectrometer for difficult environments where portability and insensitivity to vibration are required. The RS2000 is also perfect for applications requiring high resolving power and complete spectral range coverage.
The RamanProbe product line offers measurement capabilities for hand-held, immersion, and reaction monitoring applications. The patented optical design provides complete removal of silica background, high throughput, and experimental versatility.
The InPhotote is a complete, field portable chemical identification system. Incorporated into the carrying case are a laser, spectrograph, TE-cooled CCD detector, RamanProbe sampling probe, and notebook computer for the on-site identification of unknown chemical species. Although compact and portable, the InPhotote boasts 6 cm-1 spectral resolution over a 2000+ cm-1 range making it capable of discriminating mixtures and detecting contaminants. The portable device can be powered by a 12V outlet (e.g. car battery) or a separate portable power pack as well as conventional 110V-AC power. Designed for field identification of forensic chemicals, the InPhotote can be used in many applications where rapid analysis through packaging materials is required.
|Interspectrum OU (Estonia, Tartu) is the spectroscopy instrument
company, manufacturer of laboratory and transportable FTIR spectrometers.
Interspectrum OU manufactures: the Model 2060 - Non Water Sensitive FTIR
Instruments for High Humidity Environments, Model 200-X - High Resolution
Fourier Transform Infra Red Spectrophotometer, Model 300-X - FTIR Portable
Instrument, Model 301-X - FTIR Portable Instrument with open infrared beam.
All Interspec FTIR instruments offer high S:N ratios and can provide ratios
up to 20000:1. Resolution in the infrared is available 2 cm-1 and programmable
up to 16 cm-1 The overall wavelength range is 7000 to 380cm-1.
The Interspec - 2000 series of FTIR spectrometers represent a low cost Fourier transform infrared spectrometers and employ a number of unique features that ensure high performance from a compact instrument. The Interspec-2000 measures just 43 X 33 X 29 cm and is regarded as one of the the most compact and versatile of all commercially available infrared spectrophotometers. The optical geometry is the simplest employing a new and remarkably compact Michelson self compensating optical system that eliminates many of the optical alignment problems found in conventional linear and pendulum type optical interferometers. The Interspec-2000 design avoids the use of conventional corner cube optics and dynamic alignment. In practice this also means that the instrument can be used in the research laboratory, in any university or college environment and if required, can also be used outside laboratory or in remote locations.
|J&M Analytische Mess-und Regeltechnik GmbH.|
|J&M Analytische Mess-und Regeltechnik
GmbH is the German instrument company, a manufacturer of the TIDAS modular
diode-array spectrometer system, light sources (xenon lamps, xenon lamps
with monochromator, halogen lamps, deuterium lamps), fibre guide optics,
flow cells, analytical instrumentation for ion analysis, software and additional
instruments for spectroscopy. J&M Analytische Mess-und Regeltechnik
GmbH manufactures diode-array spectrometer with fiber guide technology
for UV/VIS/NIR and fluorescence spectroscopy, benchtop spectrometer with
quartz fiber optics that enable immersion probes, remote cells and optical
spheres to be used without loss of sensitivity. Custom-made fibre guide
optics are available on request.
Diode array fluorescence spectrometers fearures large sample compartment with temperature control for cuvettes up to 100 mm pathlength, HPLC flow-through cuvettes, HPLC sample cell steel connectors for absorption and fluorescence, adaptable to all common TLC-scanners via fibre optics for thin layer chromatography with diode-array detector. Spectrometer cassettes with a faster measurement rate (up to 1200 spectra/sec.) are available for the measurement of fast kinetics. Multiplexer for 2-4 channels for SMA and J&M connectors including fibre guide for connection to spectrometer cassette.
The TIDAS modular Diode-Array Spectrometer system can customized by combining various different types of light source and spectrometer components. The working components of the spectrometer are securely encased and synchronised in a ceramic chassis. J&M also offer an extensitve range of accessories. Also the TIDAS for NIR- fibre-technology optimized for NIR with spectral range 900 nm - 1700 nm and Peltier cooling.
|Jasco is the analytical instrument and scientific instrument company, manufacturer of instrumentation for optical spectroscopy ( FT-IR spectrometers and IR microscopes, Raman spectroscopy systems, spectrofluorimeters, polarimeters), and high performance liquid chromatography (HPLC instruments and systems, SFC, SFE equipment and systems), dissolution testing (tablet dissolution tester). Jasco (JASCO Corporation) is a one of the world leading manufacturers of the research-grade optical spectroscopy instrumentation and high performance liquid chromatography instrumentation. Jasco manufactures UV-Visible-NIR spectrometers (UV-Vis-NIR spectrophotometers), FT IR spectrometers and FT/IR microscope accessory (IR microscope for rapid IR imaging), FT Raman spectrometery systems and dispersive Raman spectrometers, fluorescence spectrometers (spectrofluorimeters), circular dichroism spectrometers, digital polarimeters. Jasco manufactures two infrared microscope models which can be easily interfaced to FTIR system (for Jasco FTIR spectrometers only). Jasco manufactures mobile (compact, lightweight and transportable) FT-IR spectroscopy system. Mobile FT-IR spectroscopy system with IR microscope module can be used as mobile FTIR microscopy system. Mobile FT-IR spectrometer with fiber-optic probe or diffuse reflectance accessory can be used for on-site, on-line composition analysis of liquids, solid samples, powders. Jasco also supplies software package for optical spectroscopy.|
|J.A. Woollam Co., Inc.|
|J.A. Woollam Company, Inc is a manufacturer of spectroscopic ellipsometry hardware and software. J.A. Woollam Company, Inc manufactures equipment for thin film characterization by spectroscopic ellipsometry. J.A. Woollam Company, Inc is a manufacturer of spectroscopic ellipsometers in the infrared, visible, and deep ultraviolet region. Non-destructive materials characterization of multi-layer thicknesses, optical properties (complex dielectric function), composition, anisotropy, doping concentration, and much more. The VUV-VASE - The J. A. Woollam Company now has a second generation Vacuum Ultraviolet ellipsometer designed to accommodate large samples and photomask or wafer mapping.|
|Kaiser Optical Systems, Inc.|
|Kaiser Optical Systems (KOSI) is a developer and manufacturer
of process Raman instrumentation (process Raman analyzers), laboratory
Raman systems, holographic optics and holographic optical components.
Kaiser Optical Systems, Inc (KOSI) develops and manufactures a wide variety
of instruments and components for Raman spectroscopy. The company products
range from single holographic notch and bandpass filters and high-performance
military and commercial holographic optics, to robust process Raman instrumentation
and high-performance laboratory Raman systems.
Kaiser Optical Systems manufacture on-line process Raman analyzers for the chemical, polymer, and pharmaceutical industries. The HoloProbe family of Raman analyzers utilize remote fiber-optic probes for in-situ, contact or non-contact measurements in single or multipoint formats. Also the HoloLab family of laboratory instruments for methods development or at-line analyses. Versatile HoloLab sampling accessories include a remote fiber-optic probe for reaction monitoring, a Raman microscope, and a class 1 sample compartment for routine analysis.
|Kett manufactures process (online), desktop (lab), and handheld (portable) instruments for chemical composition analysis, moisture measurement, coating thickness measurement, powder and granular whiteness / color measurement, tribology. Kett is a manufacturer of NIR (Near Infrared) chemical composition analyzers, NIR moisture analyzers (handheld, desktop, and on-line NIR moisture analysers), moisture determination balances (moisture balances), portable wood moisture testers and paper moisture testers, concrete and mortar moisture testers, grain moisture analyzers, coating thickness testers, whiteness meters-colorimeters, tribometer and surface property analyzers for tribology science. Near Infrared Composition Analyzers - These devices provide instantaneous, non-contact measurements of moisture, fat, protein and other components for both solids and liquids by using optical absorbance. Optional data analysis software and specialized sensors for process control systems. Near Infrared Moisture Analyzers - Handheld, desktop, and on-line production models of NIR moisture analysers are available.|
|LT Industries, Inc.|
|LT Industries Inc is the analytical instrument company, manufacturer and supplier of laboratory, portable at-line and on-line near infrared analyzers (portable, lab and process NIR analysers) for the pharmaceutical industry, food, beverage, chemical and petrochemical industries. The NIR instrument system is a smart, multi-point chemical analyzer with electronic and software ties into the refinery’s distributed control system. The LT PetroScan system for gasoline refinery is a continuous monitor for blending of gasoline from refinery components. The Iso-Chem systems are portable NIR analyzers with remotely triggered testing probes. They are designed to provide confirmatory chemical analysis, in seconds, at-line. The Iso-Pharm NIR analyzer is the pharmaceutical material monitor. The Iso-Pharm, LT Industries’ NIR pharmaceutical analysis system are built for GMP compliance, with cleaning validations and ease-of-use in mind. Iso-Pharm also meets the critical business tests of the increasingly vigorous raw material quarantine world. Also LT Industries Inc is a manufacturer of the FREEDOM NIR raw material analysis probe, the first non-contact probe, which preserves the chemical integrity and safety of the tested product. The FREEDOM system can be used with both the Iso-Pharm and Iso-Chem low-cost NIR analyzers.|
|Lumex (St. Petersburg, Russia) is a manufacturer of chromatography and electrophoresis instrumentation (gas chromatography instruments, HPLC systems, capillary electrophoresis and electrochromatography systems), optical spectroscopy instrumentation (mercury analyzer systems, portable mercury in air analyzer, GF AAS system, FTIR spectrometers, FTNIR composition analyzers, FT-NIR whole grain analyzers, fluorimeters - luminometers, fluorescence spectrometers). Lumex manufactures field and process water analysis instrumentation (fluorescence instruments for water analysis, oil in water monitors, continuos flow water analysers, electrochemical on-line, in-line water analyzers, water quality monitors, turbidity monitors). Lumex also manufactures biochemistry analyzer.|
|McPherson, Inc is the spectroscopy instrument company,
manufacturer and supplier of spectroscopy analytical instruments, multimode
(UV, fluorescence or Raman) spectrometer, spectrophotometer, HPLC detectors,
light sources and replacement lamps for spectrophotometers and HPLC
detectors, synchrotron radiation scientific instrumentation. McPherson,
Inc manufactures turnkey spectroscopy systems includes: calibration and
spectral measurement system, multimode spectrometer for transmission, fluorescence
or Raman, photoacoustic spectrometer, spectrophotometer for Quality Control
in the UV-VIS-IR, vacuum ultra-violet spectrophotometer. McPherson, Inc
offers custom manufacturing services.
McPherson, Inc is a maniufacturer of HPLC detectors: Fluorescence Spectrophotometer, HPLC Variable Wavelength Spectrofluorometer, The Multimode Spectrometer, HPLC Chemiluminescence Detector. A broad range of replacement lamps for spectrophotometers and HPLC detectors.
|Midac Corporation (USA) is a manufacturer of laboratory (benchtop) FTIR spectrometers, industrial, process FTIR spectrometer systems, on-line FTIR gas analyzers, open-path FTIR spectrometer systems. Midac Corporation manufactures FTIR spectrometers and application-specific FTIR spectrometer systems: in-line, on-line FTIR gas analyzer systems, process analyzers for moisture in corrosive gases (moisture in gas analysers), open-path air monitioring system for continuous emissions monitoring, remote analysis of stack gases (open-path FTIR CEMS), mobile air monitoring system (long-path FTIR air analyzer).|
|MTEC Photoacoustics, Inc.|
|MTEC Photoacoustics, Inc is the spectroscopy instrument
company, manufacturer of high performance photoacoustic detector accessories
for use in FTIR spectrometers. The Model 300 (PAC300) photoacoustic detector
increases laboratory productivity by quickly measuring FTIR spectra of
solid, semi-solid, and liquid samples in any form without sample preparation.
The PAC300's operating modes include depth profiling, photoacoustic absorbance,
diffuse reflectance and transmittance with capabilities for both macro
MTEC products are sold through FTIR manufacturers, accessory firms, and directly by MTEC to users. Customers are welcome to send samples to MTEC for demonstration spectra to evaluate FTIR photoacoustic spectroscopy for their needs. MTEC's applications laboratory is well situated for evaluating capabilities of FTIR photoacoustic spectroscopy due to extensive experience with the technique and the presence of both research and QC level FTIR spectrometers. MTEC sells directly to endusers and through all the major FTIR companies and accessory firms in the U.S. and foreign countries.
|NDC Infrared Engineering.|
|NDC Infrared Engineering is a manufacturer of process analytical
and measuring instrumentation for continuous on-line measurement and control
of moisture, oil and protein, coatings weight, coating thickness, plastic
film thickness, barrier layer. NDC Infrared Engineering is the comprehensive
source of on-line continuous process measuring instruments for the paper,
plastics, converting, food, tobacco, timber, pharmaceutical, and chemical
industries. NDC Infrared Engineering manufactures the backscatter sensors
for moisture measurement in bulk materials such as chemicals, pharmaceuticals,
wood products, animal feed, minerals, building materials, explosives and
many more. The Infragauge Pro for complete web measurement, scanning and
profile display system solution, features s range of sensors for accurate
on-line measurement of moisture, coat weight and film thickness in web
applications (including sensors for the measurement of thin lacquer coatings
on aluminium foils and steel sheet, for accurate measurement of coatings
on paper, plastics and textiles or moisture content in paper, non wovens
or textiles, for measurement is silicone coating weight on paper, for measurement
of plastic film thickness, barrier layers in co-extrusions, resin impregnation
in glass fibre and moisture content of paper and non wovens, for the accurate
measurement of blown plastic film). The Food Sensor is a backscatter sensor
designed specifically for the food industry (moisture, fat and protein
are typical measurements), features hygienic design in stainless steel
with FOOD SAFE sapphire optical window. The on-line sensor for the measurement
of moisture and other parameters in tobacco. The Infralab at-line analyser
for accurate, operator independent measurements in a fraction of the
time taken by conventional laboratory wet chemistry analysis (dedicated
versions are available for tobacco and food applications). The Liquidata
fibre optic probe for the accurate analysis of liquids in line. The Moistrex
for the accurate, instantaneous measurement of moisture at line. Slimline
scanners made for scanning applications where there is not much space on
the plant for installation. Also manufactures narrow bandpass filters,
wide bandpass filters, laser diode filters, edge filters, color separation
filters, dichroic filters, hot mirrors, cold mirrors, antireflection filters.
Also offer remote sample and display unit and calibration check standards.
TM5000E - InfraLab At-Line Analyzer for the Food Industry. InfraLab provides fast, accurate and dependable measurements of moisture, fat and protein. The system uses proven NDC Infrared Engineering measurement technology, a robust sampling system and MS Windows NT software for simple operation. Full networking facilities for easy integration into modern Laboratory Information Management Systems (LIMS) is standard. Multiple measurements on every sample provide statistical confidence limits with each analysis, minimizing the need for replicate testing. Also lnfraLab provides fast, accurate and dependable measurements of moisture, nicotine and sugars at all stages in GLT and Primary processing.
The TM710 tobacco gauge. The TM710 is pre-calibrated for tobacco and can be applied universally throughout leaf and primary processing. From leaf processing of individual grades through cut stem and cut lamina processing, from high to low moistures, the TM710 gauge provides the measure of qaulity.
An advanced on-line multi-constituent infrared gauge. The MM710 near infrared (NIR) backscatter gauge for on-line measurement unlike other IR Sensors, can tolerate changes in lighting, product or ambient temperature and variations in relative humidity (RH).
The Liquidata In-Line Beer Analyzer for in-line measurement of alcohol and original extract. The system comprises a sensor, containing the fiber optic based insertion probe and optics assembly, a control unit and a self-contained dry air purge module. The sensor is directly inserted into the beer main using the supplied retractor assembly and adapter, or a fixed mounting flange. Because all liquid contact areas will withstand a wide range of temperatures, pressures and brewery cleaning procedures, hygiene is assured. Liquidata can be integrated with most blending stations and process control systems.
|neoplas control GmbH.|
|neoplas control GmbH (Germany) is a manufacturer of quantum
cascade laser measurement and control system. neoplas control manufactures
the Q-MACS, a compact and user-friendly Quantum cascade laser- measurement
and control system, has been developed for various applications, like the
analysis of plasma processes or the high sensitive trace gas analysis.
It combines the benefits of absorption spectroscopic methods in the mid
infrared with the favorable properties of quantum cascade lasers and is
therefore, in combination with thermoelectrically cooled infrared detectors,
well suited for industrial applications, in particular for real-time process
control. The Q-MACS is a line of spectroscopy instruments developed by
Q-MACS Basic - QCL spectrometer for absorption spectroscopy in the mid infrared region. Consisting of laser head, supply and connector cable. Supports QCL-mounts of AlpesLasers and LaserComponents. Software package TDLWintel (Aerodyne Research Inc.) for control and data analysis.
Q-MACS Trace - On-site or mobile system designed for user defined application. Trace gas measurements for environmental studies and high sensitive gas analysis (measurements of concentrations down to the ppb range). Long path cell for increased sensitivity.
Q-MACS Enviro (planned) - Trace gas monitoring analytical system for environmental control and high sensitive gas tracing (monitoring of concentrations down to the ppt range). 3-Channel configuration with measuring, reference and normalization channel. Long path cell for increased measurement sensitivity.
Q-MACS Process (planned) - Analytical system for monitoring and control of gas and plasma processes. Features 3-Channel configuration with off-board measuring, reference and normalization channel. Thermoelectrically cooled detectors.
|NIR Technology Systems.|
|NIR Technology Systems (formerly NIR Technology Australia)
is the spectroscopy instrument company, manufacturer of portable, lab and
process NIR analyzers (near infrared spectrometers for chemical composition
analysis and moisture measurement). NIR Technology Systems manufactures
portable, battery powered whole grain NIR analyzer for the farmer market,
benchtop whole grain NIR analyzer for grain elevator market, flour mills,
stock feed mills and other grain processors, near infrared transmission
(NIT) analyzer, fiber optic probe NIR analyzer, alcohol analyser for the
food stuff and beverage manufacturing companies. Whole grain analyzers
(lab and portable devices) is designed for measurement of protein, moisture
and oil in grains and oil seeds. Both instruments is a full spectrum NIR
transmission spectrometers with calibrations for protein, moisture and
oil in cereal grains including wheat, barley, sorghum, canola.
Near Infrared Transmission (NIT) analyzer is the NIR spectrometer - analyzer designed for laboratories rather than field use. It is intended for method development of calibrations and experimentation. This analytical instument is suitable for measuring fat, protein and moisture in dairy products, processed meats and processed foods. It is also suitable for measuring alcohol in wine, spirits and beer, as well as sugar content of fruit juice, cough syrup, soft drinks (sodas) and other beverages. The instrument is supplied with a number of different sample cells for handling pastes, liquids and granules. The Alcohol analyzer uses NIR transmission spectroscopy for the analysis for multiple constituents in beverages, including wine, beer, spirits.
Fiber Optic Probe (FOP) analyzer is the NIR spectrometer in a portable carry case uses a fiber optic probe to provide measurement of fat, protein, moisture, oil, alcohol, sugar in any type of sample for which a calibration can be developed. Three different fibre optic probes are available: transmission, reflectance and interactance. This system is being promoted into the food and industrial markets as a portable NIR analyzer suitable for use on the factory floor or in the field.
NIR Technology Systems is predominantly an instrument developer provides solutions to analysis problems. The major technology attributes of the company include: rapid product development, expertise in microprocessor design and implementation to develop self contained analyzers, expertise in visible and NIR spectroscopy, expertise in chemometrics, expertise in fibre optics and fibre optic probe design.
|Nytek Instruments is a supplier of fluorescence spectrometers and microscopes, Raman spectrometers, Raman microscopy systems, thin film measurement instruments (ellipsometers), ICP-OES systems, glow discharge spectrometers, XRF spectrometers, EDXRF microspectrometer, XRF sulfur in-oil analyzer, UV fluorescence sulfur in-oil analyzer, C, H, N, O, S analyzers. Nytek Instruments supplies optical components and modules, instrument parts, accessories and consumables for chromatography and spectroscopy. The company also supplies pure gas generators, oilless compressors, pure air generators.|
|Ocean Optics, Inc.|
|Ocean Optics, Inc is the spectroscopy instrument company, manufacturer of the optical spectroscopy instruments and modular components for spectroscopy, including miniature fiber optic spectrometers, data acquisition hardware, light sources, chemical sensors, optical fibers and accessories. Ocean Optics, Inc manufactures optical spectrometers couple to an extensive line of accessories- nearly 200 light sources, fiber optic probes and optical fibers, cuvette holders, filter holders, flow cells and more- to create complete analytical systems. Ocean Optics, Inc supplies a comprehensive library of data acquisition and display software products for a variety of spectroscopic applications. Custom and pre-configured spectrometers are useful for a variety of UV/VIS and Shortwave NIR applications. Configure systems for absorbance / transmission spectroscopy, fluorescence, reflection, irradiance, emission, Raman spectroscopy, oxygen and pH sensing, and chemistry-lab education. PC2000 plug-in spectrometer mounted on an A/D card that installs directly into a slot in a PC and the Raman Systems R-2000, a fully integrated low-cost system for Raman spectroscopy.|
|OKB Spectr (ОКБ Спектр).|
|OKB Spectr (Saint-Petersburg, Russia) is a manufacturer of spark optical emission spectrometers for metal analysis (spark OES metal analyzers), FT-IR spectrometers, UV-visible-NIR spectrophotometers, monochromators for optical spectrometers, metallographic microscopes and microhardness testers.|
|PerkinElmer is a manufacturer of atomic absorption spectrometers, inductively coupled plasma-optical emission spectrometers (ICP-OES systems, ICP-AES systems), inductively coupled plasma mass-spectrometers (ICP-MS systems), CHNS/O systems, UV, UV/Visible spectrometers, FT-IR, FT-NIR, Raman spectrometers, microscopes and imaging systems, fluorescence spectrometers, GC instruments, GC/MS systems, HPLC instruments, UHPLC instruments, LC/MS systems, thermal analysis instruments (STA, DMA, TGA-FTIR, TGA-MS systems), calorimeters (DSC systems). PerkinElmer also manufactures lab automation systems, automated liquid handling equipment, lab robotics, microplate readers, high throughput screening systems, neonatal screening systems, prenatal screening systems, clinical diagnostics systems, radiometric detectors (luminescence counters, gamma counters, beta counters, liquid scintillation spectrometer, flow scintillation analyzers). PerkinElmer also offers software, data handling systems for chromatography and spectroscopy, LIMS.|
|P&P Optica Inc.|
|P&P Optica Inc is the spectroscopy instrument company, manufacturer and supplier of fiber optic cables and bundles, custom interference filters and optical elements, Raman imaging spectrometer system. P&P Optica Inc provides contract services in opto-mechanical design, alignment and assembly of optical systems. Applications include spectroscopy, biomedical instrumentation, non-invasive testing, laser beam delivery, industrial process control and lighting.|
|Perten Instruments AB.|
|Perten Instruments is a manufacturer and suppliers of the
quality control instruments for feed, food, flour, and grain including:
falling number, near infrared filter and near infrared whole grain analyzers,
glutomatic gluten analyzer, single kernel characterization system and laboratory
The Falling Number System - provides the international standard method for determination of alpha-amylase activity in grain and flour. The Glutomatic System - provides the world standard test for gluten quantity and quality in wheat. A rapid and accurate quality test on wheat whole meal and flour. The Single Kernel Characterization System 4100 - is the unique instrument for hardness classification and determination of uniformity in grain. The Diode Array 7200 System - is the second generation Diode Array based NIR Analyzer. A full-spectrum instrument for 3-second multiparameter analysis without the need for sample preparation. The Inframatic System - Near Infrared analyzers in the grain, flour and food industry for determination of protein, moisture, hardness, ash, fat. Laboratory Mills - A range of laboratory mills for correct and convenient sample preparation for most tests used in the grain industry.
|Petrolab Company is a manufacturer and distributor of standardized
petrochemical test instruments, including: Grabner Instruments and Petrotest,
for vapor pressure, flashpoint, distillation, viscosity, FTIR, density
and color. Product lines: Petroleum Test Equipment- Flashpoint and Flammability
Testers, Vapor Pressure and Vapor / Liquid Ratio Testers, Penetrometers
and Benchtop Tensile Testers / Asphalt (Bitumen) Testers, Color Analysis,
Viscosity Baths and Accessories, Reference Standards, Gasoline and Hydrocarbon
Sampling, Additional Test Equipment and Accessories.
Petrochemical instrumentation, including Grabner vapor pressure, miniflash, V/L ratio and oxygenates in fuel testers, flashpoint, distillation, viscosity baths, corrosion, penetrometer, autoignition, Brookfield cold cabinets, pour-cloud-and-freezing point, CFPP, oxidation, ductility, aniline, gum content, Reid vapor pressure, carbon residue, foaming characteristics, salts-in-crude oil, Noack, liquid dispensers, asphalt testers, conductivity of jet fuels, ASTM thermometers and hydrometers, on-line vapor pressure, mini-densitometer, and total hydrocarbons in water or soil.
IROX Portable FTIR for Liquids and Octane- IROX is a portable gasoline analyzer based on the ASTM approved method of IR absorption measurement in the mid-IR range of 2 to 115 microns. IROX was developed to monitor oxygenates and aromatics in fuels, and utilizes FTIR and correlation technology to identify and quantify the mass and volume percent of specific oxygenates. A built-in densitometer measures the density of fuel during the rinsing and filling cycle of the instrument. The analytical method offered by this tester is fast, reliable and simple enough to be used by nontechnical field personnel. The portability and the battery powered option are very useful for on site analysis of gasoline. All measured values are stored in an internal memory for later documentation. Minicon THC for Detection of Total Hydrocarbons in Water and Soil.
|Petroleum Analyzer Company L. P. (PAC)|
|Petroleum Analyser Company L P (formerly
Varlen Instruments Inc) combined the leading manufacturers of petroleum
test equipment - Alcor Petroleum Instruments, ISL, Walter Herzog GmbH,
PetroSpec and Precision Scientific Petroleum Instruments into a single
manufacturing, marketing, and service organization. PAC Petroleum Analyzer
Company is a Roper Industries Inc company. Petroleum Analyzer Company (PAC)
is a supplier of petroleum testing equipment, manufactured by Alcor, Herzog,
ISL, PetroSpec and Precision Scientific Petroleum Instruments. Petroleum
Analyzer Company offer assortment of automatic, semiautomatic and manual
instruments for laboratory and online petroleum testing available from
PAC offer a full range of instruments and calibration samples for determining many of the following properties- Distillation, Flash Point, Viscosity, Pour Point, Cloud Point, Freezing Point, Cold Filter Plugging Point, Vapor Pressure, Penetration, Softening Point, Salt in Crude Oil, Saybolt and ASTM Color, Oxygenates in gasoline, Octane number, Benzene, Aromatics, Olefins, Saturates, Napthalenes, Density, VOC, Thermal Oxidation, Carbon Residue, Cetane number, and many more.
The PetroSpec line of petroleum analyzers are the first real-time, on-line instruments that measure the properties of diesel fuel/gasoline/turbine fuel and other liquids quickly, accurately, and require no special training or calibration maintenance. Laboratory scale products manufactured by PetroSpec include; GS series for determination of octane, oxygenates, benzene, aromatics, olefins, saturates and other properties in gasoline. DT series for red dye and ASTM color in diesel fuel. JT series for red dye and Saybolt color in aviation fuel in cooperation with Alcor. JFT series for aromatics and other properties in aviation fuel and CET series for cetane and other properties in diesel fuels. The GS 1000 is a multi-function analyzer designed for the fast and accurate compositional analysis of gasoline. It utilizes sophisticated mid-infrared technology to differentiate and quantify the individual fuel components, including oxygenates, benzene, total aromatics, olefins, and saturates. The GS 1000 also determines the fuel's Research Octane Number (RON), Motor Octane Number (MON), and (R+M)/2 value.
|PetroMetrix, Ltd is the process analytical instrument company, manufacturer and supplier of process analyzers based on Near Infrared (NIR) technology for the petroleum and petrochemical industries. The Beacon-2000 II NIR Analyzer for refineries, petrochemical plants and pipeline companies. Intrinsically safe, low cost sample probes, combined with unique fibre optic technology, allow the measurement of physical and chemical properties even in hazardous and remote locations. The Beacon Lab System is a free-standing, comprehensive and high-performance petroleum analyzer, capable of simultaneously measuring multiple hydrocarbon properties, under laboratory conditions. It is used for both Quality Assurance testing and model development to support the Beacon 2000-II On-Line System. The sample system itself is highly flexible - handling extremely volatile liquids such as light Naphtha as well as heavy distillates such as Heavy Gas Oil.|
|Petrotech Analytical Corp. Ltd.|
|Petrotech Analytical is a supplier of petroleum testing equipment, portable instruments and complete mobile labs for gasoline analysis, diesel fuel analysis. Petrotech Analytical supplies a whole range of petroleum testing instruments and complementary laboratory equipment. The company supplies laboratory apparatus for petroleum distillation, crude oil distillation, determination of evaporation loss, aniline point testing, flash point testing, cloud point, pour point, freeze point, cold filter plugging point testing, softening point testing, demulsibility, oxidation, penetration testing, vapor pressure, viscosity measurements. Petrotech Analytical supplies portable FTIR gasoline analyzer, FTIR diesel fuel analyzer, Pensky-Martens closed-cup flash point tester, Reid vapor pressure analyzers (Reid vapor pressure testers), viscosity analyzer. Petrotech Analytical supplies mobile gasoline and diesel fuel testing laboratories (mobile gasoline analysis and diesel fuel analysis labs). Petrotech Analytical supplies elemental analyzers, total sulphur analyzers, UV fluorescence sulfur-in-oil analyzers, XRF suphur-in-oil analyzers (X-ray fluorescence spectrometers for the analysis of sulfur in fuels, petroleum, crude oil). The company supplies asphalt binder analyzer, reometer system for low-temperature asphalt binder test (low thermal cracking testing).|
|PIKE Technologies Inc.|
|PIKE Technologies Inc is a developer, manufacturer and
supplier of optical spectroscopy accessories and optical systems enhancing
performance and extending use of commercial FTIR spectrometers. PIKE Technologies
Inc manufactures a wide range of Attenuated Total Reflectance (ATR), Diffuse
Reflectance (DRIFT), Specular Reflectance and Transmittance accessories
are available. These products replace traditional techniques used in infrared
analysis and provide reliable alternatives to liquid cells, KBr disks and
pellets. This new generation of sampling devices is easy to use, and to
maintain, which results in better productivity and cost savings. PIKE products
are available for direct analysis of liquids, powders, pliable solids and
other organic materials. ValuLine offers an inexpensive, manual set of
the basic accessories designed for routine use. Research grade products
built for more demanding applications and a full range of automated systems
for unattended analysis and QC/QA work are also available. A dedicated
group of products is designed to assist in analysis of chemical composition
of silicon wafers and electronic storage media. PIKE Technologies accessories
fit all FTIR spectrometers.
uMAX - Sample Compartment IR Microscope - PIKE Technologies offers microsampling accessories which demagnify the FTIR beam to a smaller dimension and thereby increase IR throughput for small samples.
|Polychromix is the American analytical instrument company, manufacturing truly portable (handheld) NIR analyzers, compact, transportable benchtop NIR spectrometers with fiberoptic sample accessory, and portable light sources.|
|Polytec GmbH (Waldbronn, Germany) is a manufacturer of optical measurement and analytical equipment (modular diode array NIR spectrometer systems and components, laser surface velocimeters, laser vibrometers, microscope-based systems to measure the dynamics and topography of microsystems and micro-electromechanical systems, MEMS, dynamic stress and strain measuring instruments, surface metrology instruments, 3-D profilometers for surface characterization, HDD media tester, optical surface analyzer for nano-defect and topography measurements of HDD media). Polytec GmbH manufactures modular NIR spectrometer systems for online process control and laboratory measurement. The modular NIR spectrometer system includes sensor head (remote reflection sensor head, contact reflection sensor head, transmission sensor head, immersion probe) + diode array NIR spectrometer and software.|
|Process Instruments, Inc.|
|Process Instruments Inc is a manufacturer and supplier of industrial Raman systems without moving parts, optimized for fiber-optic coupling in process control application. Process Instruments Inc manufactures stable, high-performance, and affordable fiber-coupled Raman analytical system based on proprietary frequency-stabilized, narrow linewidth, diode-laser and spectrograph technology. Raman systems incorporating TE-cooled CCD detection and low noise. Frequency-stabilized, narrow linewidth laser sources for any wavelength from 640 to 980 nm. For additional stability both laser and spectrograph can be temperature controlled. The rugged, stainless steel remote Raman probe can be used as either a hand held probe or in a permanent process control installation. The spectrograph is compatible with most commercial Raman fiber-optic probes (Visionex, EIC) and the fiber-coupled input can be multiplexed.|
|Proscan Special Instruments.|
|Proscan Special Instruments (Minsk, Belarus) is a manufacturer of optical spectroscopy instrumentation (UV, Visible, NIR spectrometers) and electro-optical components for scientific instruments (digital cameras). Proscan Special Instruments manufactures UV-Vis-NIR spectrophotometers, IR spectrometer, and Visible-NIR lifetime luminescence spectrometer (time-resolved fluorescence spectrometer for visible and NIR spectral ranges). Proscan Special Instruments manufactures IR digital cameras, Visible, UV-Visible digital cameras, UV-Vis-NIR CCD cameras.|
|Q-Interline (Denmark) is a manufacturer of FT-NIR analyzers and accessory sampling equipment for food, feed, dairy industries. Q-Interline manufactures a line of specialized FT-NIR spectrometers, diffuse reflectance probes and immersion probes for at-line, on-line analysis of food stuffs, dairy products (butter).|
|Remspec Corporation is the spectroscopy instrument company,
manufacturer and supplier of high performance fiber-optic spectroscopy
systems for reaction monitoring and rapid chemical analysis, that operate
in the mid-infrared, and probes for fiber optic infrared (FTIR, NIR and
Raman) spectroscopy. Remspec Corporation manufactures and supplies turnkey
analytical systems for reaction and process monitoring and in situ analysis
of solids, liquids, gases, and coatings. Portable, laboratory, and pilot
plant analytical systems are available.
Remspec Corporation also manufactures and supplies high performance NIR and NIR / FT Raman probes. Remspec Corporation offers a range of different fiber-optic sampling probes depending on the system to be studied. In addition to fully integrated turnkey systems, Remspec Corporation supply modular systems that can be coupled to almost any FTIR spectrometer. The Interferometer light source - a choice of standard interferometer light source that is rugged and portable or a rugged transportable system with a sample compartment. The units come with a computer and data collection and analysis spectroscopy software. ATR probes, liquid transmission probes, gas transmission probes, reflectance probes.
|Renishaw plc specialized in automated metrology, manufactures
products for automation of CMM and CNC machine tool operations, calibration,
encoder, scanning and spectroscopy systems. The Renishaw Group's products:
CMM probe systems, machine tool probe systems, calibration products, encoder
products, laser scale systems, scanning products and spectroscopy products.
Renishaw plc has developed a low cost, ultra-fast 2-D imaging Raman microscope for spectral analysis of materials. Two versions are available, a standard laboratory model using a conventional microscope for viewing and an industrial model for more general use where a monitor screen displays the Raman images and spectra. System 100 compact Raman spectrometer uses dedicated fibre optic probes which enable sampling at up to 100m distance. Raman spectra can be acquired from sample sizes 1µm to more than 150mm. Renishaw has established a Raman gemological and mineralogical materials database, the first library of Raman spectra to be commercially available. It contains nearly 1,000 entries of over 500 different minerals and gems and can be used for the identification of unknown samples. The Raman microscope which uses ultra-violet (u.v) light rather than the more usual visible light excitation of other instruments in the range. The resultant Raman "scattering" occurs at a shorter wavelength than most fluorescence and is not masked by it.
The spectrograph uses specially developed laser-blocking filters and a single diffraction grating to give unprecedented throughput and signal-to-noise values. In addition to biochemistry applications, materials science - direct measurement of the hydrogen content of hard carbon films, and forensic science - detection of explosives on fabrics, have already benefited from the system's increased sensitivity. New accessories include an UV enhanced CCD camera. Сompact diode laser designed as a source for optical spectroscopy.
Renishaw plc manufactures the DLC (diamond-like-coating) analyser, using Raman spectroscopy, for quality control purposes in the production of hard disk drives. Using Renishaw's unique PASS software, the analyser can be semi-automated to give a simple pass / fail message, in addition to full operating parameters for process development.
|Sciencetech Inc is a manufacturer
of modular spectroscopic systems, light sources, detection systems, monochromators
and spectrometers, accessories, far infrared interferometer. Sciencetech
modular spectrophotometer systems are assembled with Sciencetech monochromators,
light sources and detectors. The fast and simple upgradability lets the
user transform a simple single beam UV/VIS spectrophotometer into a diffuse
reflectance system, or into a dual beam UV/VIS/IR, or even use the components
to assemble a high performance fluorometer.
Sciencetech line of Modular Instrumentation Systems includes high dispersion spectrographic illumination system, very high power density spectral illumination system, solar simulator, spectral fiber illumination system, photo-corrosion system, modular spectrophotometer systems, Raman spectroscopy, scanning spectrophotometer systems, fluorometer systems, scicolor colorimetry system, spectroradiometer system for spectral characterization.
|Shanghai SK Petroleum & Chemical Equipment Corporation Ltd.|
|Shanghai SK Petroleum & Chemical Equipment Corporation Ltd (Shenkai) is a manufacturer of petroleum exploration instruments, petroleum machinery, and petroleum testing equipment. Shenkai manufactures a broad range of analytical instruments and laboratory apparatus for motor fuel testing, LPG, lubricating oil and grease testing. Shenkai manufactures gasoline octane number testers, NIR gasoline analyzer, open-cup flash point and fire point testers, closed-cup flash point testers, sulfur in oil analyzers (XRF sulfur-in-oil analyzer, sulfur in dark petroleum products analyzer), kinematic viscosity testers, capillary viscometers, distillation apparatus, density meters, colorimeters, solidification point testers, pour and cloud point testers, cold filter plugging point testers, acid number and acidity testers, ash content testers, mechanical impurities testers, demulsibility testers, cone penetration testers and dropping point testers for grease, foaming characteristics testers for lubricating oil, softening point tester for bitumen, water content testers for crude oil and petroleum products. Shenkai manufactures benchtop NMR spectrometer for crude oil analysis (NMR crude oil analyzer).|
|Shimadzu Corporation is one of the
world leading analytical and scientific instrument companies, a manufacturer
of analytical equipment (gas chromatography, liquid chromatography instruments
and systems, portable ion chromatography systems, mass spectrometry, optical
spectroscopy, X-Ray spectroscopy instruments and systems, elemental analyzers,
thermal analyzers), laboratory equipment (electronic laboratory balances,
analytical balances, moisture determination balances - balance moisture
analyzers), measuring equipment (calorimeters, moisture meters, viscometers,
rheometers, particle size analyzers, force gauges, specific gravity meters),
scientific equipment (X-ray, XRF spectrometers, X-ray diffractometers,
surface science instruments: scanning electron microscopes, scanning probe
electron microscopes), materials testing equipment (material testing machines,
hardness tester systems).
Shimadzu Corporation manufactures a broad range of elemental analysis and spectroscopy equipment, instruments, systems: atomic-absorption spectrometers (flame and graphite furnace AAS instruments), spark optical emission spectrometers for metal analysis and alloy identification (OES metal analyzers), ICP spectrometers, FT-IR spectrometers and FTIR microscopes (FT-IR microanalysis systems), UV-visible spectrophotometers, fluorescence spectrometers, MALDI-TOF mass spectrometry systems, X-ray fluorescence spectroscopy and X-ray diffractometry instruments and systems (X-ray fluorescence spectrometers and X-ray diffractometers), optical components (holographic gratings), consumable products, parts and accessories for spectroscopy and elemental analysis.
|Simex (Novosibirsk, Russia) is a manufacturer of FT-IR spectroscopy and microspectroscopy instrumentation. Simex manufactures FTIR spectrometer and FTIR microscope systems (FTIR microspectrometers).|
|Smiths Detection (formerly Barringer Technologies Inc) is a manufacturer of specialized analytical instrumentation for security, law enforcement and other applications. Portable and hand-held narcotics and explosives detectors. Lab and portable FT-IR spectrometers, infrared microspectrometer, and ATR sampling systems for FT-IR spectrometers.|
|SOLAR TII (Minsk, Belarus) is a manufacturer of analytical and scientific instruments (laser induced optical emission spectrometer, fluorescence / Raman microanalysis system), optical components and systems (monochromators, optical parametric oscillators, spectrographs), solid-state tunable lasers. SOLAR TII manufactures atomic emission spectrometer system (laser elemental analyzer) for laser induced breakdown spectroscopy or LIBS. Laser elemental analyser is a fully automated laser induced optical emission spectrometry system for materials surface elemental analysis permitting both composition and coating layers thickness measurements. SOLAR TII manufactures laser fluorescence / Raman microanalysis system (scanning confocal microscope + laser luminescence / Raman spectrometer).|
|Spectra Analysis, Inc. (formerly Bourne Scientific, Inc.)|
|Spectra Analysis (formerly Bourne Scientific) is a manufacturer
of the InfraRed Chromatograph (IRC) configured as an HPLC-IR, GPC-IR, GC-IR
and SFC-IR analytical system. InfraRed Chromatograph is a FTIR spectrometer
- chromatographic detector providing both real-time chromatographic and
spectral data analysis (as well as GC-MS or LC-MS system).
GC-IRC system for gas chromatography - infrared spectroscopy: the Infrared Chromatograph (IRC) system is a complete FTIR detector for chromatography and provides full FTIR spectra of the eluent stream from a GC column. It is a capillary GC detector, including FTIR spectrometer, data station for driving the FTIR and processing spectral data, and the vacuum interface for depositing and scanning the sample during chromatographic separation.
HPLC-IRC and GPC-IRC systems for liquid chromatography - infrared spectroscopy and gel permeation chromatography - infrared spectroscopy: the IRC configurations for HPLC, GPC, and SFC (supercritical fluid chromatography) systems. The IRC (InfraRed Chromatograph) is a real-time direct-deposition interface to FT-IR spectrometer. It uses an ultrasonic nebulizer, desolvation tube, and vacuum chamber to evaporate the solvent from the LC stream. The sample residue then deposits onto a moving ZnSe window. There is also a configuration as a non-volatile residue analyzer, the DIRA for quantitative and qualitiative determination of non-volatile residues in volatile solvents.
|Spectro Incorporated is the analytical instrument company, manufacturer of industrial tribology systems, industrial fuel analysis laboratory, instruments for predictive maintenance, oil and fuel analysis and quality control. Spectro Incorporated manufactures the turnkey systems for condition monitoring of machines through oil analysis. These systems consist of all the instrumentation and software required for analysis of wear particles, contaminants, additives and physical properties of lubricants and hydraulic fluids. Spectro Incorporated manufactures the Spectro family of optical emission spectrometers includes compact, rugged, transportable oil analysis spectrometer. Spectro Incorporated is a manufacturer of Spectroil M Family of Oil and Fuel Analysis Spectrometers, LaserNet Fines Particle Counter and Particle Shape Classifier, Automatic Sample Processor for LNF-C (Sample Changer), Rotrode Filter Spectroscopy Device, Fuel Sniffer (Fuel Dilution Meter), Analytical Ferrography Laboratory, High Speed Viscometer, Turnkey Oil Analysis Laboratory, Spectroil M/R Robotic, COAST (Customized Oil Analysis Software for Tribology). Spectroil M Oil & Fuel Analysis Spectrometers designed for the analysis of wear metals, contaminants, and additives in lubricants or gas turbine fuels. FTIR spectrometer systems for fuel and oil quality testing, fuel dilution testing.|
|StellarNet Inc is a manufacturer of spectroscopy instrumentation
- miniature fiber optic spectrometers, industrial process probes, optical
fibers, light source accessories. Also SpectraWiz software for process
control and quality control. StellarNet Inc manufactures analytical instrumentation
measuring light wavelength absorbance, transmission, reflection, color,
emission, irradiance, and fluorescence. StellarNet Inc manufactures a line
of rugged, modular, portable, miniature spectrometers and software can
be used for remote sensing and process applications in the factory or field.
Measurements for ranges in the ultraviolet (UV 190-400nm), Visible color
(VIS 350-850nm), short-wave Near Infrared (NIR 500-1000nm), and Near Infrared
- InGaAs detectors (NIR 900-2200nm) are easily performed by the portable
EPP2000 (high speed parallel & USB-2) or ISA2000 (Multi-Channel Box)
fiber optic spectrometers. Up to 8 EPP2000 spectrometers may be daisy chained
thru a digital IEEE1284 parallel or USB-2 port. Up to 8 ISA2000 spectrometers
may be installed in the industrial rackmount, or 4 in the portable spectro
box. These instruments easily handle process applications requiring
simultaneous multi-beam configurations.
CCD and Photo Diode Array spectrograph optics have no moving parts or detector sockets. Spectrometers are designed to be vibration tolerant and use thermal stabilization suitable for process applications. The EPP2000C spectrometer has no mirrors. It uses an aberration corrected holographic concave grating for superb imaging while minimizing stray light. This instrument covers the UV and VIS ranges in one unit (190-850nm) with high grating efficiency at both ends of the spectrum using miniature UV-VIS light sources. This improves the signal to noise in spectroscopy measurements by providing the highest possible reference. When configured as a spectroradiometer, the SpectraWiz software easily measures the absolute intensity and chromaticity of LED.
The PORTA-LIBS-2000 field portable laser elemental analyzer - The PORTA-LIBS-2000 it the portable fiber optic spectrometry instrument for laser induced breakdown spectroscopy (LIBS). The PORTA-LIBS-2000 instrument integrates portable spectrometers made by StellarNet (Tampa, Florida) and Kigres’ (Hilton Head, SC) nanosecond pulsed, Nd:YAG NIR Laser that delivers 6 MegaWatts to create a plasma. Portable high resolution EPP2000 spectrometers are integrated with a high intensity pulsed laser, and sample chamber, to permit UVVIS-NIR spectral analysis of unknown samples. The portable instrument case is just 18 x 14 x 7 inches and operates via 12 volt adapter or battery. Detection requirements determine the number of required spectrometer channels. Up to 8 high resolution spectrometers can be attached via USB-2 computer interface with 0.1 or 0.2nm resolution. The SpectraWiz software provides element identification via spectral database for qualitative measurements. Samples can be quickly measured and saved to log-file. Options allow customization of spectral search algorithms. Custom compound element libraries can be created or searched.
|tec5 AG is the German spectroscopy instrument company,
specialized in the developement and production of innovative optical sensor
systems, operating OEM electronics for detector arrays or spectral sensors
and OEM spectrometer systems. tec5 manufactures a wide range of products
for the optical spectroscopy from single OEM components like preamplifier
boards for detector arrays up to complete OEM Spectrometer Systems for
a wide range of applications and demands. Also tec5 is distribution partner
of Carl Zeiss for spectrometer modules in Germany.
Product lines: UV/VIS spectrometers, NIR spectrometers, optical spectroscopy, operating electronics for diode arrays, optical multiplexers, process measurement systems, On Line Analysis, customer specific OEM measurement systems, portable optical sensors. Features products: MultiSpec spectrometer systems in 19" technology with various electronic platforms for UV/VIS and NIR based on diode array technology, customer specific high-quality OEM spectrometer systems.
Custom Designed Systems such as: Compact measurement device, CompactSpec UV-VIS for on-line concentration determination in liquids. Portable spectrometer system, HandySpec VIS, a high-quality hand-held device for spectral analysis, allows the performance of exact transmission measurements in liquids.
|Author of the catalogue - Andrey Yurievich Zhdanov.||Автор каталога - Андрей Юрьевич Жданов.|
|Analytical and laboratory equipment companies, scientific instrument companies.||Производители и поставщики аналитического и лабораторного оборудования.|