|Manufacturers and suppliers of gas analysis equipment, instruments, systems (gas analysis instrumentation, process gas analysis systems, process gas analyzers, portable gas analyzers, gas chromatographic natural gas analyzers, GC NGA systems, hydrogen sulfide in natural gas analyzers, total sulfur in natural gas analyzers, trace gas analyzers, gas purity analyzers, emissions measurement instruments, continuous emission monitoring systems, CEMS, flue gas analyzers, stack gas analyzers, infrared photometers for gas analysis, FTIR spectrometers for gas analysis, IR, FTIR gas analyzers, process mass-spectormeters, residual gas analyzers, RGA, process GC systems.||Производители и поставщики оборудования, приборов для анализа газов (газоаналитическое оборудование, поточные промышленные анализаторы газов, портативные газоанализаторы, анализаторы состава природного газа, приборы для определения содержания сероводорода, меркаптанов в природном газе, анализаторы чистоты газов, анализаторы промышленных газовых выбросов, дымовых газов, инфракрасные фотометры, ИК-Фурье спектрометры для анализа газов, промышленные масс-спектрометры для анализа газов, промышленные газовые хроматографы - газоанализаторы).|
|Manufacturers and suppliers of electronic nose instruments or e-noses and automation e-nose systems for smell analysis, toxic vapors detection, narcotics and explosives vapor detection (portable and benchtop multi-sensor array analytical instruments and systems, e-nose smell analyzers, toxic vapor analysers, explosives detectors, narcotics detectors).||Производители и поставщики портативных аналитических приборов на базе сенсорной матрицы (электронный нос) и автоматизированных параллельных аналитических систем для распознавания запахов, анализаторов запахов, детекторов паров токсичных, взрывчатых веществ и наркотиков.|
|International companies index.||Международный указатель компаний.|
|AIRSENSE Analytics GmbH.|
|AIRSENSE Analytics GmbH is a manufacturer of analytical
instruments for the detection of gaseous compounds, such as gas sensor
array systems, electronic noses and trap & thermal desorption systems.
The primary products are: Electronic Nose is a new light weight and low
cost analytical device which will be provided with on-line controlling
software and neural network based identifcation. Electronic nose designed
to identify complex gaseous samples quickly and easily, suitable for testing
and monitoring of foodstuffs. Electronic noses are portable, handy and
can be used in every conceivable location.
PEN Portable Electronic Nose - Intelligent chemical Sensor. PEN2 is our small, fast and robust identification system for gases and gas mixtures. The detection of the gases is performed with an array of gas sensors. Single compounds or mixtures of gases can be identified after a training step by using the pattern generated by the sensors. The instrument provides a fast and easy answer like "god" or "bad", "yes" or "no" - depending on the needs of the user.
i-PEN Industrial Process control Electronic Nose - Intelligent Gas Sensors for the Industry. The gas sensor array systems i-PEN are based on the electronic nose technology. The devices were developed for operation in hostile industrial environments. With a design compatible with an industrial standard (19" euroboard format) a very flexible usage is possible. The module i-PEN-MOD is based on an array of ten gas sensors, the required electronic circuits with a microprocessor and a serial interface for data transfer to a remote PC. The different sensors are built into a very small sensor chamber. Versions with single and identical sensors which can be positioned at different locations are also available (i-PEN-VS). The systems were developed as OEM-modules for the integration into analytical measurement systems.
|Alpha MOS is a manufacturer of analytical instruments for vapors odour analysis, smell and taste analysis (electronic noses, electronic tongues). Alpha MOS manufactures e-noze analyzers (automated headspace and automated thermodesorption systems for smell analysis, vapors odour analysis), e-tongue analyzer.|
|Electronic Sensor Technology (EST).|
|Electronic Sensor Technology (EST) is a manufacturer of
portable vapor detectors, field portable, rapid site characterization and
monitoring systems, and the Electronic Nose. Electronic Sensor Technology
(EST) developed and manufactured portable GC for vapor/surface analysis.
Field Screening and Trace Analysis. The 7100 portable benchtop GC and the
4100 portable handheld analyzers. The Vapor detector and analyzer identifies
vapors as low as parts per trillion concentrations and amounts less than
50 picograms. A proprietary Surface Acoustic Wave (SAW) detector results
in a system with previously unattainable sensitivity in a portable low-cost
package. User interaction mode is selectable to meet the needs of both
non-technical field operation and detailed lab analysis. The 4100 is capable
of detecting vapors and particles of controlled substances in various
situations. The 4100 will detect, analyze, and report the peaks and concentrations
of various explosives in 10 seconds. Drug screenining and detection of
Cocaine, Marijuana, Meth-Amphetamine, Heroin (Other drugs upon request).
The 4100 is available to developers of fully integrated systems for non-intrusive
Electronic Sensor Technology offers also the Electronic Nose. Electronic Nose performance has been EPA validated for Environmental Monitoring of Air, Water, and Soil. Within seconds it can detect VOC contaminated drinking water, or dioxins and PCB in soil. The Electronic Nose is also the first to be approved for detecting Drugs of Abuse such as Marijuana, Cocaine, and methamphetamines. Explosives such as TNT or nitroglycerin can also be detected.
|GSG Analytical Instruments.|
|GSG Analytical Instruments is a manufacturer of gas chromatography
equipment, mass-spectrometers, electronic nose, and supplier of analytical
solutions for mass spectrometry: Ultra High Performance FT-MS, MALDI-TOF,
Pyrolysis-GC-MS and Pyrolysis-GC, LC-MS. GSG Analytical Instruments is
a manufacturer of mass spectrometry products for organic, bio-organic and
polymer laboratories: Ion Cyclotron Resonance cells (ICR), Quadrupoles,
Time of Flight tubes (TOF) in combination with ionisation methods such
as MALDI (Matrix Assisted Laser Desorption Ionisation), ESI (Electrospray
Ionisation), EI/CI (Electron Impact & Chemical Ionisation), coupling
with gas chromatography (GC) and liquid chromatorgraphy (LC). Wide range
of electron multipliers for every mass spectrometer and surface analysis
Supplies and Upgrades for MS- Electron Multipliers and Detectors Including a complete selection guide. MS, GC, LC, Vacuum Supplies and Consumables. Simion 3D v6.0 software for ion optics design. Sensitivity upgrades for Hewlett Packard 5970, 5971, and Perkin Elmer QMASS. Services- MS Filament Repair, MS Probe Repair. Vacuum Pump Repair.
Accessories- Solid Probe for HP 5973, TD-4 Single Shot Thermal Desorption, AutoDesorb Auto Sampling System, GC Cryo Traps and Micro Cryo Traps.
Curie Point Pyrolyser with automation capabilities for GC and GC/MS. The CPP 1040 Curie Point Pyrolyser is robust, reliable, and easy to use. It is capable of handling all sample types whether solid, liquid or powder, making it ideal for a host of applications using GC, GC/MS and GC/FTIR.
Pyrolysis/GC and Pyrolysis/GC/MS Systems- the complete and comprehensive PyroChrom (pyrolyser + GC) and PyroMass (pyrolyser + GC/MS) packages. Systems can be configured, coupling the GSG curie point pyrolyser with Hewlett Packard's 6890 series GC and 6890/5973 series GC/MS.
Electronic Nose (E-Nose)- a modular and flexible sensor system for the analysis and classification of gas mixtures and odours. M·O·S·E·S II is a modular sensor system for fast and informative classification of gas mixtures, aromas and flavours which is very often more important than sophisticated time consuming and expensive identification of single compounds. M·O·S·E·S II include a unique multi sensor sampling system which provides the highest level of confidence that can only come from a multi dimensional sensor array. Multiple sensor options including Quartz Micro Balance, Metal Oxide, Calorimetric and Electro Chemical. Simultaneous operation of multiple sensors. Easily portable. High flexibility of configuration utilising plug in sensor modules. Short analyses times and high sample throughput. Sample input module allows active sampling with up to three additional gases. Automated Headspace sampler.
|MIL-RAM Technology, Inc.|
|MIL-RAM Technology Inc is the gas detection instrument
company, manufacturer of sensors and dependable controllers are designed
to monitor and detect hazardous gases, toxic and combustible gases for
environmental protection and process controls, as well as oxygen deficiency
for personal safety. Mil-Ram Technology, Inc develops its own sensors and
designs and packages custom systems using the Tox-Array sensors. There
is a sample-draw option for areas that are too hot or too cold to detect
gases by diffusion. Also available is a Pyrolyzer for detection of chlorofluoro-carbons
(Freons) and other compounds. The D. DAS 1536 (Digital Data Acquisition
System) is offered for multi-point systems with capacity of 1536 points.
The Tox-Array sensors will be detect: NH3, AsF5, AsH3, BCl3, BF3, Br2, CO2, CO, Cl2, ClO2, LEL, B2H6, SiH2, Cl2 F2, GeH4, N2H4, H2, HBr, HCl, HCN, HF, H2O2, H2Se, H2S, CH2CI2, HNO3, NO, NO2, NF3, O2, O3, COCI2, PH3, SiH4, SO2, C2HCl3, C2Cl4, H2SO4.
The Tox-Array sensors, developed by Gary Milco at Mil-Ram Technology, are the next generation in the time-proven electrochemical gas detection technology. The chemically selective sensors do not react with air, have no zero drift, are not sensitive to changes in temperature, humidity or pressure eliminating false alarms, and stay awake when gas is absent. Response time is 30 seconds to ninety percent and recovery is less than 15 seconds even when exposed to high gas levels and have over three years no maintenance life for each factory charge.
|Osmetech plc (formerly AromaScan) specialized in developing
technology for the rapid and inexpensive detection of micro-organisms,
such as infectious bacteria, fungi and moulds, through the application
of multi-sensor array technology. Osmetech also market industrial systems
for detecting and measuring odours in raw materials for personal care products,
in polyurethane foams and the raw materials used to manufacture them, and
Osmetech's products are based on unique conducting-polymer sensor array. Across this array, the user is able to measure dynamically the total headspace of a sample. Osmetech manufactures two key products: The MultiSampler-SP, an automated detection system for characterising the volatile content of a variety of sample types using dynamic headspace sampling and the Core Sensor Module, an application-specific sensor unit (customisable sampling and analysis module) that can be incorporated into third-party equipment for rapid low-cost detection, diagnosis and remedial action.
The MultiSampler-SP combines the automation of a field-proven headspace autosampler with the well-established Osmetech 32-element conducting-polymer sensor array. This configuration enables many samples to be analysed in a very short period of time, irrespective of the sample type. Solids, liquids and powders can be analysed using this powerful dynamic headspace technique.
|Author of the catalogue - Andrey Yurievich Zhdanov.||Автор каталога - Андрей Юрьевич Жданов.|
|Analytical and laboratory equipment companies, scientific instrument companies.||Производители и поставщики аналитического и лабораторного оборудования.|